Detailed introduction:

Model: ZY-CMTLC (customized), specifications and dimensions: 800 * 500 * 650mm;

Stainless steel hanging cabinets, wall mounted storage cabinets, and stainless steel wall cabinets are made of high-quality stainless steel plates and are mostly single-layer spaces with open or sliding door styles. The size, model, and plate thickness of the hanging cabinets are customized according to the actual needs of customers.

Stainless steel hanging cabinets (wall cabinets, stainless steel storage cabinets) ）

This product is often customized according to customer needs (board specifications, board thickness, structural form, single-layer or double-layer, door opening style, cabinet size)

Storage cabinet, hanging cabinet

4.1 This standard specifies the technical requirements, testing methods, and inspection rules for stainless steel storage cabinets and hanging cabinets.

4.2 Technical Requirements

4.2.1 Storage cabinet, hanging cabinetThe stainless steel raw materials used should comply withGB3280The relevant regulations for austenitic stainless steel.

4.2.2 Storage cabinet, hanging cabinetAfter polishing, the surface texture should be uniform and consistent, and the outer surface roughness should conform to the sample block, without obvious scratches, hammer marks, or burn marks.

4.2.3 Storage cabinet, hanging cabinetEach connecting part should be firm, with uniform and consistent welding patterns, and no defects such as incomplete penetration or cracks are allowed. Exposed welds should be polished or discolored.

4.2.4 Storage cabinet, hanging cabinetThe fasteners at each connection point should be evenly positioned and securely connected.

4.2.5 Storage cabinet, hanging cabinetSharp corners and burrs are not allowed in contact with the human body.

4.2.6The maximum deviation of the external dimensions is ±3mm.

4.2.7The perpendicularity of adjacent surfaces shall not exceed5mm.

4.2.8Adjust feet firmly and flexibly.

4.2.9The cabinet doors and drawers open and close flexibly without any abnormal noise.

4.2.10The shelf and bottom plate should be able to withstand25kgThe deformation of the load should be less than3mm.

4.3 Inspection of appearance quality

4.3.1to4.2.2、4.2.3、4.2.4、4.2.5、4.2.8、4.2.9The strip is inspected by hand feel and visual inspection.

4.3.2Inspection of dimensional tolerances4.2.6The strip is inspected using a steel tape measure or steel ruler.

4.3.3Inspection of form and position tolerances4.2.7Article adopted90Angle ruler inspection.

4.3.4load-bearing test

Place the product in its normal use state and place it in the center of the shelf and bottom plate respectively500×500mmPlace wooden boards on top of each other50kgHeavy object, stationary1hAfter checking the closure status of the cabinet doors and drawers, remove heavy objects, and measure the vertical deformation at the intersection of the diagonal lines of the loaded plane.

4.4 Marking, packaging, and storage

4.4.1logo

The product should have a logo, which should include the trademark, product name, model specifications, manufacturer name, and date of manufacture.

4.4.2packaging

Storage cabinet, hanging cabinetPackaging should be done in plastic bags, cardboard boxes, wooden boxes or according to user requirements, and the product packaging should be able to adapt to the transportation mode used. The formal packaging should have a label, which should include: product name, manufacturer, model specifications, weight, volume, packing date, etc.

4.5 After inspection, fill in the finished product inspection record form and sign it

After passing the inspection, sign on the warehouse receipt for storage, and dispose of non-conforming products according to the non-conforming product control procedure.