overview

Magnetic drive centrifugal pump (referred to as magnetic pump) usually consists of an electric motor, a magnetic coupling, and a corrosion-resistant centrifugal pump. Its main feature is that when the outer magnetic steel of the magnetic coupling rotates, the magnetic field lines pass through the gap and isolation sleeve, acting on the inner magnetic steel, causing the pump rotor to rotate synchronously with the motor and transmitting torque without mechanical contact. At the power input end of the pump shaft, due to the liquid being enclosed in a stationary isolation sleeve without a dynamic seal, there is no leakage at all. CQB magnetic pump is a new type of completely leak free and corrosion-resistant pump developed by the national joint design team. CQB produces it according to the GB/T25140-2010 "Technical Conditions for Shaftless Rotary Power Pumps (Class II)" standard.

The CQB series magnetic pump is suitable for industries such as petroleum, chemical, pharmaceutical, smelting, electroplating, environmental protection, food, film and television printing, water treatment, national defense, etc. It is an ideal equipment for transporting flammable, explosive, volatile, toxic, rare and valuable liquids as well as various corrosive liquids. CQB type magnetic pump is suitable for conveying liquids without hard particles and fibers with a pressure of 1.6MPa, a temperature not exceeding 120 ℃, and a viscosity not exceeding 30X10-6m2/s. CQB-G high-temperature magnetic pump delivers liquid without hard particles and fibers with a pressure of 1.6MPa, a temperature not exceeding 300 ℃, and a viscosity not exceeding 30X10-6m2/s. When the pressure of the conveying medium system is greater than 1.6MPa, our unit can carry out special design and manufacturing.