VIP member
Stainless steel vacuum pressure gauge
1、 Product Overview: Stainless steel vacuum gauges and stainless steel pressure vacuum gauges are used to measure the pressure and negative pressure o
Product details
1、 Product Overview
Stainless steel vacuum gauges and stainless steel pressure vacuum gauges are used to measure the pressure and negative pressure of liquid and gas media that do not corrode stainless steel 316, 316L, and 0Crl8Ni12MO2Ti. Stainless steel has stronger corrosion resistance to the environment.
Shock resistant vacuum gauge is used to measure negative pressure of non corrosive and non crystalline media under vibration and pressure fluctuations
Electric contact pressure vacuum gauge and electric contact vacuum gauge are made of copper and copper alloys, which have no corrosive effect, no explosion hazard, and are non crystalline and non solidifying liquids, gases, and other media (pressure) and negative pressure When the pressure reaches the predetermined value, the control circuit can be connected or disconnected with the help of a contact device, and an electrical signal can be emitted at the same time.
Electric contact pressure vacuum gauge is used to measure the pressure and negative pressure of non crystalline and non solidified liquids, gases, and other media such as copper and copper alloys, which have no corrosive effect and no explosion hazard When the pressure and negative pressure reach the predetermined values, the magnetic electric contact device can be used to connect or disconnect the control circuit
Electric contact vacuum gauge is used to measure the negative pressure of liquids, gases, or vapors that do not corrode copper and copper alloys And when the negative pressure reaches the predetermined value, an electrical signal is emitted to turn on or off the control circuit
2、 Selection parameters
| Model number | accuracy class | Measurement range Mpa | Structural characteristics | Joint thread |
| Z-60 | 2.5 | -0.1 | radial | M14×1.5 |
| Z-100 | 1.6 | M20×1.5 | ||
| Z-150 | ||||
| Z-60 | 2.5 | -0.1-0.06 0.15 | radial | M14×1.5 |
| YZ-100 | 1.6 | 0.3 0.5 0.9 | M20×1.5 | |
| YZ-150 | 1.5 2.4 | |||
| YZ100ZT | Axial belt | |||
| YZ150ZT | in front |
3、 Model differentiation
Y represents pressure gauge; Z represents damping or vacuum; B represents explosion-proof or standard; J represents precision or rectangle; A represents the ammonia meter; X represents a signal or electrical contact; XC represents magnetic assisted electrical contact; P represents the membrane; E represents the membrane box; F represents anti-corrosion; N represents shock resistance; T represents the spring tube; B represents stainless steel. In addition, the commonly used pressure gauge models are as follows: YTF stands for stainless steel pressure gauge; YA stands for ammonia pressure gauge; YXC represents an electric contact pressure gauge; YZ represents vacuum pressure gauge; YY represents acetylene pressure gauge; YO stands for heat-resistant pressure gauge; YH stands for hydrogen pressure gauge.
4、 Specification differentiation
Pressure gauge threads are divided into metric, imperial, and American systems.
1. Metric system:
M20×1.5
20 "represents a diameter of 20mm at the threaded part of the joint;
"1.5" represents a distance of 1.5mm between the screw threads;
M "represents a pipe thread with a tooth tip angle of 60 °;
In general:
The size of the connecting thread with a diameter of 40 is M10 × 1;
The size of the connecting thread with a diameter of 60 is M14 × 1.5.
The connecting thread size for diameter 100 and 150 is M20 × 1.5;
2. Imperial system:
G1/2″
"" "represents inch 1"=25.4mm
G "represents a non self sealing pipe thread with a tooth tip angle of 55 °
The diameter size of the connecting pipeline is generally "1/2", which includes: G1/2”
In general, this thread G1/4 "is used for diameter 100 and 150, and G1/8, G3/4, G3/8, ZG1/2 (R1/2), and" ZG "(R) represent non self sealing cone pipe threads with a tooth tip angle of 55 ° for diameter 60.
3. American system:
1/2 "NPT" represents a self sealing spinal canal thread with a tooth tip angle of 60 °.
5、 Price
The price varies depending on the material, installation method, and pressure level. Users should provide on-site parameter quotations for accuracy.
1/2 "NPT" represents a self sealing spinal canal thread with a tooth tip angle of 60 °.
5、 Price
The price varies depending on the material, installation method, and pressure level. Users should provide on-site parameter quotations for accuracy.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-