Delta Instruments provides the following nationally certified standard substances for third-party testing laboratory clients:
1 |
Standard wool expansion sample block for washing machine |
Appendix I.1 of GB/T 4288-2018 |
2 |
Washing machine sebum standard contaminated cloth |
Appendix D of GB/T 4288-2018 |
3 |
Washing machine protein standard contaminated cloth |
Appendix D of GB/T 4288-2018 |
4 |
Washing machine carbon black standard pollution cloth |
Appendix D of GB/T 4288-2018 |
5 |
Washing Machine Standard Washing Fabric Napkins |
Appendix C.4 of GB/T 4288-2018 |
6 |
Washing Machine Standard Washing Fabric Handkerchief |
Appendix C.4 of GB/T 4288-2018 |
7 |
Standard washing machine for fabric shirts |
Appendix C.4 of GB/T 4288-2018 |
8 |
Standard washing machine for fabric sheets |
Appendix C.4 of GB/T 4288-2018 |
9 |
Test load (bed sheets, pillowcases, towels) |
Test load technical parameters: (Bed sheet: length 2400 ± 50mm, width 1600 ± 40mm, weight 725 ± 15g, pillowcase: length 800 ± 50mm, width 800 ± 20mm, weight 240 ± 5g, towel: length 1000 ± 50mm, width 500 ± 30mm, weight 110 ± 3g); |
10 |
Polyester standard washing fabric |
(Size: 300mm × 300mm, polyester knitted fabric, mass: 35 ± 3g, unit area mass: 200 ± 25g/m ²); |
11 |
900mm pure cotton fabric |
Double layered folded pure cotton fabric, size 900mm × 900mm, density 90-110g/m2 |
12 |
Pure cotton fabric 700mm |
Double layered folded pure cotton fabric, size 700mm × 700mm, density 140-175g/m2 Standard GB 4706.20-2004, Chapter 3.1.9 |
13 |
Thermal insulation material |
Open cell polyether, 300 × 100 × 15mm, with 18+2/-0 pores/cm, a mass density of 30kg/m3+10%, and a hardness of 120-170N when measured according to GB/T10807 (ISO2439) at 40% indentation |
14 |
Polyethylene sheet |
Size approximately 200 * 200mm, thickness 50um |
15 |
Insulation material/felt strip |
The insulation coefficient is 3.2m2K/W, the size is not specified, about 1 * 1m/thickness 20mm, the length and width are not required, about 100 * 100cm |
16 |
Felt strips/rectangular paper strips/cotton flannel fabric/cotton gauze |
The width is 100mm and lined with a single layer of fabric. The mass density is 4 ± 0.4kg/m2 and the thickness is 25mm The textile lining is made of cotton fabric with a weight of 140-170g/m2. Copper sheet with a diameter of 15mm and a thickness of 1mm, with a unit mass of 72 ± 2g/m2 and a rupture index of 3.7kPam2/g as specified in ISO2758. The dry state width is 100mm, and the unit area mass is approximately 130-165g/m2/40g/m2 |
17 |
mineral oil |
① Mineral oil: Aniline point (93 ± 3) ℃; |
18 |
Sodium isobutyl naphthalene sulfonate |
Sodium isobutyl naphthalene sulfonate with a mass fraction of 0.5% ± 0.002% |
19 |
Cotton pad |
Cotton pads should be made of defatted cotton designated as "100% cotton" or "pure cotton" |
20 |
talc |
① Talc powder should be filtered through a metal square hole sieve with a wire diameter of 50um and a sieve size of 75um. |
21 |
Special silk paper for hot wire test/needle flame test |
Cotton paper that meets the requirements of 4.215 in ISO 4046-4:2002 is soft and sturdy, with lightweight packaging of 12g/m ² -30g/m ². |
22 |
polyvinyl chloride |
GB 4706.80-2008 Foot Warmer: Specification 300mmx150mmx50mm, Density 20kg/m3+-5kg/m3 |