VIP member
Static pressure high temperature input type liquid level transmitter
Jiangsu Meiante Instrument specializes in producing BP500 high-temperature input liquid level transmitters, which are solid-state structures, have no
Product details
The ATE-BP500 series static pressure high-temperature input liquid level transmitter is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output.
The sensor part of the ATE-BP500 series static pressure high-temperature input liquid level transmitter can be directly input into the liquid, and the transmitter part can be fixed with flanges or brackets, making installation and use extremely convenient and overcoming the limitation of only working in low-temperature environments.
Overview and Technical Parameters of High Temperature Input Liquid Level Transmitter
Measurement range: 0.3~100m (optional by the user)
Accuracy: 0.2, 0.5, 1.0 levels
● Working temperature:- 20℃~200℃
● Output signal: 2-wire 4-20mADC
Power supply voltage: standard 24VDC (12~36VDC)
● Non sensitive area: ≤ ±1.0%FS
● Load capacity: 0~600 Ω
Relative temperature: ≤ 85%
● Protection level: IP68
Explosion proof mark: Exia II CT4-6
Overview and Selection Table of High Temperature Input Liquid Level Transmitter
| Type spectrum | describe | |||||||||||
| ATE500P | Input type static pressure high temperature liquid level transmitter | |||||||||||
| Class quality | 2 | Rod type (sensor installed at the bottom, directly in contact with liquid medium) | ||||||||||
| 3 | Anti-corrosion type | |||||||||||
| 4 | Pressure rod type (sensor installed on the upper part, not in direct contact with the medium) | |||||||||||
| Process connection form | T | Bracket installation | ||||||||||
| N | Flange installation DN40 PN1.0 | |||||||||||
| Y | Special Agreement | |||||||||||
| Sensor connection material | 1 | 304 | Rod style | |||||||||
| 2 | 316 | |||||||||||
| 3 | 316L | |||||||||||
| 4 | Nitrile rubber and polyvinyl chloride composite | Cable type | ||||||||||
| 5 | Polytetrafluoroethylene (polypropylene flange) | |||||||||||
| Explosion proof method | O | Not explosion-proof | ||||||||||
| E | Intrinsic safety explosion-proof Exia Ⅱ CT6 | |||||||||||
| Display mode | O | Without on-site instructions | ||||||||||
| Z | Equipped with ammeter indication (0-100% scale) | |||||||||||
| X | Equipped with LCD digital display | |||||||||||
| Weight distribution situation | O | No need for counterweight | ||||||||||
| W | Need to balance weight | |||||||||||
| -□ | Installation height (mm) | |||||||||||
| -□ | Measurement height (mm) | |||||||||||
| -□ | Density of the tested medium (g/cm3) | |||||||||||
Overview and Characteristics of High Temperature Input Liquid Level Transmitter
Good stability, high precision, and can work in high temperature environments
Directly put into the tested medium, installation and use are quite convenient
Solid state structure, no moving parts, high reliability, long service life, can be processed from water, oil to viscous paste
High precision measurement, wide range temperature compensation unaffected by foaming, deposition, and electrical characteristics of the measured medium
Good stability, high precision, and can work in high temperature environments
Directly put into the tested medium, installation and use are quite convenient
Solid state structure, no moving parts, high reliability, long service life, can be processed from water, oil to viscous paste
High precision measurement, wide range temperature compensation unaffected by foaming, deposition, and electrical characteristics of the measured medium
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-