The steel bar bending machine is suitable for square and round pipes and is an ideal product for the furniture manufacturing industry, gate processing industry, fitness equipment industry, conveying pipeline industry, decoration industry, car parts manufacturing industry, and leisure and entertainment equipment industry.

Work precautions:

1、 The workbench and bending machine table should be kept level, and various core shafts and tools should be prepared

2、 When bending steel bars, it is strictly prohibited to exceed the diameter, number, and mechanical speed specified by the machine

3、 Check that the core shaft, stopper, and turntable are free of damage and cracks, and that the protective cover is securely fastened. Only after confirming normal operation through idle running, can work begin

4、 Install the core shaft, forming shaft, stop iron shaft or variable stop frame according to the requirements of the diameter and bending radius of the processed steel bar. The diameter of the core shaft should be 2.5 times the diameter of the steel bar

6、 When doing homework, insert the end of the steel bar that needs to be bent into the gap of the fixing pin of the bending machine turntable, and press the other end tightly against the fixing pin of the machine body with your hand. Check that the fixing pin of the machine body is indeed installed on the side that blocks the steel bar before starting

7、 During the homework, it is strictly prohibited to change the core shaft, pin, change the angle, and adjust the speed. It is also not allowed to refuel or clean

8、 It is strictly prohibited to stand within the working radius of bent steel bars and on the side of the machine without fixed pins Bent semi-finished products should be neatly stacked, and the hooks should not face upwards

9、 When bending long steel bars, a dedicated person should hold them and stand outside the direction of the steel bar bending, cooperating with each other and not dragging them

10、 Turn around and bend to prevent collision with people and objects Replace the plug, refuel and clean, and do it after stopping the machine

11、 When reversing the turntable, do it after it has come to a complete stop

12、 When bending or low-alloy steel bars, the maximum limit diameter should be converted according to the mechanical nameplate regulations and the corresponding core shaft should be replaced