VIP member
Strong flushing test device/IPX5, IPX6 waterproof test equipment
Purpose: This equipment is mainly used to test the performance of products during storage, transportation and use in the rainstorm climate environment
Product details
Purpose:
This equipment is mainly used to test the performance of products during storage, transportation and use in rainstorm climate,Mainly suitable for conducting shell protection level testing (IPX5, IPX6, IPX6K waterproof level test) on outdoor lighting, outdoor lighting fixtures, automotive lighting fixtures, household appliances, electrical appliances, communication products, signal devices and other products, dedicated to waterproof protection level testing equipment，It is an ideal testing device for professional testing institutions, as well as other water testing methods with equivalent effectiveness.
IPX5：Spray test, with a nozzle diameter of Φ 6.3mm, a distance of 2.5-3m from the test sample to the spray nozzle, a water flow rate of 12.5 L/min (750 L/h), and approximately 300kpa. Test time: Calculated based on the surface area of the tested sample shell, 1 minute per square meter (excluding installation area), with a minimum of 3 minutes;
IPX6：Intense water spray test, nozzle diameter of Φ 12.5mm, distance from the test sample to the water spray port of 2.5-3m, water flow rate of 100 L/min (6000 L/h), approximately 100kpa. Test time: Calculated based on the surface area of the tested sample shell, 1 minute per square meter (excluding installation area), with a minimum of 3 minutes;
IPX6K：High pressure strong water spray test, nozzle diameter of Φ 6.3mm, distance from the test sample to the water spray port of 2.5-3m, water flow rate of 75 L/min (4500 L/h), approximately 1000kpa. Test time: Calculated based on the surface area of the tested sample shell, 1 minute per square meter (excluding installation area), with a minimum of 3 minutes.
Main parameters:
|
1.Model:PL-010 / PL-014
2.Studio size:D1000xW1000xH1000 mm
D1400xW1400xH1400 mm
3.appearanceSize:D1050xW1350xH1850 mm(Excluding protective pipeline section)
D1450xW1750xH2250 mm(Excluding protective pipeline section)
|
|
4.Spray hole diameter and water flow rate: Φ6.3(12.5±0.625L/min)、 Φ12.5mm(100±5L/min)、 Φ6.3(75±5%L/min)
|
|
5.supplywater tank300L(Located at the bottom of the box)Water level display, inlet and outlet valves
|
|
6.Water pressure:Adjust water flow according to regulations
|
|
7.to configure:Boosting water pump, flow meter, pressure gauge, time controller, pressure regulating valve, sample rotating worktable, water supply tank, and high-pressure resistant hose, etc
|
|
8.Material:SUS304Stainless steel and high-quality copperMaterial production, industrial aluminum profiles
|
|
9.Meet the standards:
GB 4208-2008/IEC 60529:2001The Protection Level of the Shell（IPCode)IPX5、IPX6Waterproof grade test
DIN 40050-9Road VehiclesIPProtection CodeIPX5、IPX6、IPX6KWaterproof grade test
GB/T 2423.38Basic Environmental Testing Regulations for Electrical and Electronic ProductsWater test methodRb3
GB 7000.1-2007/IEC 60598-1:2006General Safety Requirements and Tests for Luminaires
ISO 20653-2013Road vehicles-Protection level(IPcode) IPX5、IPX6、IPX6KWaterproof grade test
GB/T 10485-2007Road vehiclesExternal lighting and light signal devicesEnvironmental durabilityWaterproof test
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-