Groove type slide Y-shaped ball sewage check valveStructure and images

Introduction to groove type ball check valve

Product name: Groove type slide Y-shaped ball type sewage check valve, abbreviated as groove type ball type check valve.

Groove type ball check valve product function: installed on pipelines for check, with excellent check performance.

Groove type ball check valve structure

The difference between groove type ball check valve and flange type ball check valve is that the connection between the two ends of the valve and the pipeline is different, which is connected to the pipeline through clamps. Other structures are the same as flange type ball check valves, which use rubber coated balls as valve discs. The rubber coated valve plate has good elasticity and is smoother when exposed to water. When water comes in from the incoming supply, it pushes the ball valve along the track to the storage room. When the water supply stops, the ball valve slides down and seals the valve to prevent water from flowing back.

Picture of groove type ball check valve

The above physical photo is a front view of a groove type ball check valve. The diameter of the check valve is DN100, the pressure rating is PN16, the material is QT450, and the groove needs to be connected to the pipeline with clamps.

This photo clearly shows the petals, which are coated with black glue. On the left side is the blind plate cover, which can be opened to remove the ball valve.

This physical picture shows a groove type ball check valve with a diameter of DN80. This check valve is shipped in cardboard packaging. For product information on multi groove ball check valves, please call:.