The ability to spray sediment into turbulence is achieved by water pumps without auxiliary devices for high concentration transportation. The unique sealing device can effectively balance the pressure inside and outside the oil chamber, maximizing the reliability of the mechanical seal. The motor adopts various protection measures such as overheating protection and water inlet detection protection, which can operate safely for a long time under harsh working conditions.
Used for extracting sand, silt, coal slurry, fly ash, sludge, tailings slurry, mineral sand, iron ore, rivers, lakes, reservoirs, ports and other sand and silt removal projects for construction purposes. It can also be used for sand removal in sedimentation tanks of industrial and mining enterprises such as steel plants, power plants, iron mines, oil fields, and for sediment removal in sewage treatment plants.

Structural characteristics

1. The whole machine is a dry bottom pump type, and the motor adopts an oil chamber sealing method with a mechanical seal inside, which can effectively prevent high-pressure water and impurities from entering the motor cavity.
In addition to the main impeller, there is also a stirring impeller that can stir the sediment settled at the bottom of the water into turbulence and extract it.
3. The impeller and stirring impeller and other overcurrent components are made of high hardness high chromium cast steel, which is wear-resistant, corrosion-resistant, and has strong drainage ability, and can pass through larger solid particles.
4. The motor is submerged underwater without being limited by suction, with a high slag absorption rate and more thorough dredging.
5. The overall equipment is simplified, no auxiliary mixing or spraying devices are allowed, the operation is simple, and the total investment of the unit is reduced.
6. The stirring impeller is directly close to the sedimentation surface and the concentration is controlled by diving depth. In cases where the medium ratio is high, auxiliary devices can be installed to increase the medium concentration

Conditions of Use

1. The power supply is a 50Hz/380V/660V three-phase AC power supply, and the capacity of the distribution transformer is 2-3 times the rated capacity of the motor.
2. The temperature of the medium shall not exceed 60 ℃ and shall not contain flammable or explosive gases.
3. The maximum weight concentration of solid particles in the medium is 45% for ash residue, 60% for slag residue, and within 40% for slurry concentration.
4. Diving depth of the unit: not more than 60 meters, the minimum diving depth is based on submerging the motor.
5. The working position of the unit in the medium is vertical, and the working state is continuous.

Technical parameters:
Power:3KW-132KWTraffic:10-2200m3/h；
Lift:5-60m; Speed:1440r/min、2880r/min；
Caliber:50mm-400mm; Temperature range:-15℃- +110℃
Particle size:5Material within centimeters: High resistance running in steel

Cleaning up the sedimentation of a paper mill's spillway lake
2. Pumping of clear sediment in inland rivers
3. Pumping of clear sediment from the seabed of the port
4. Pumping of Mud for Bridge and Road Construction Sites
Engineering construction drainage, drainage and sediment discharge during bridge pier construction, urban rainwater pumping stations, and sewage treatment plants.
5. Sand mining, dredging, and slag removal
Factory cleaning sedimentation tank, mine clear water bin sediment, dredging river channels, beach sand mining, cleaning reservoir sediment, digging wells, removing steel slag, removing waste slag, removing fly ash from thermal power plants, discharging tailings, coal washing, beneficiation, gold mining
6. Treatment of sludge from various sedimentation tanks
Submersible sludge pumps, wear-resistant sludge pumps, and stirred sludge pumps have the characteristics of high efficiency, energy saving, wear resistance, corrosion resistance, reliable operation, high head, large flow rate (maximum mixing flow can reach 10-2000 cubic meters/hour), deep pumping depth (up to 60 meters deep), long conveying distance, and wide applicability. The solid-liquid mixture concentration during transportation can reach 60%. Can be equipped with an electric motor or a diesel generator. During the use of the sand pump, it is important to ensure that the concentration of the medium is not too high to prevent damage to the overcurrent components and affect the service life of the sand pump.

Submersible sludge pump, wear-resistant sludge pump, stirred sludge pumpManufacturing Hotline: 0634-6588011 QQ: 2659709581