T2009 Fully Automatic Wet Laser Particle Size Analyzer | Fully Automatic Particle Size Analyzer

Product Introduction:
T2009 fully automatic wet laser particle size analyzer is an intelligent fully automatic laser particle size analyzer with a testing range covering millimeter, micrometer, submicron, and nanometer full ranges. The dual beam multispectral detection system and lateral light scattering testing technology have been adopted, greatly improving the accuracy and performance of instrument testing.
Scope of application:
T2009 is widely used in cement, ceramics, pharmaceuticals, lotion, coatings, dyes, pigments, fillers, chemical products, catalysts, drilling mud, abrasives, lubricants, coal powder, silt, dust, cells, bacteria, food, additives, pesticides, explosives, graphite, photosensitive materials, fuels, ink, metal and non-metallic powders, calcium carbonate, kaolin, coal water slurry and other powdery materials.
Product features and advantages:

Fully automatic centering system	The optical path automatic alignment system is composed of a precision four item hybrid stepper motor, with micro motion accuracy reaching the micrometer level, ensuring that the instrument's optical path is always in optimal condition.
Fully built-in decentralized system	By using a high-power circulation pump and optimizing the pipeline design, the overall control coordination has reached a very high level, effectively preventing the secondary sedimentation of large particles.
Unconstrained free fitting technique	By using unconstrained free fitting techniques, particle size analysis is not limited by any function and can truly reflect the distribution state of particles.
Optical path design	Adopting the converging light Fourier transform technique, the scattered light is not limited by the lens aperture; Adopting a dual spectral surface optical path design, effectively expanding the measurement range to 2000 micrometers; The original dual laser orthogonal optical path uses semiconductor assisted lasers to measure lateral scattering from 45 degrees to 135 degrees, further expanding the measurement range.

Technical parameters:

Specification and model		T2009A	T2009B
Execution standards		ISO 13320-1:1999； GB/T19077.1-2008； Q/0100JWN001-2013
Range		0.01-2000μm	0.01-1200μm
Number of detector channels		97	95
Accuracy Error		<1% (D50 value of national standard sample)
Repeatability error		<1% (D50 value of national standard sample)
Laser parameters		Main laser source: High performance He Ne laser with λ=632.8nm and p>3.0mW Auxiliary laser source: blue light laser, λ= 650nm； p>2mW
dispersion method	ultrasonic	Frequency: f=40KHz, Power: p=50W
	stir	Speed: 0-3000rpm, adjustable speed
	cycle	Rated flow rate: 30L/min Rated power: 70W
	Sample Cell	Capacity: 1000mL
MODE		Software operation/fully automatic operation mode can be switched
Automatic centering system		Fully automatic centering system
test speed		<2min/time
volume		1040mm*440mm*540mm
weight		58Kg