Advantages of TBI linear guide rail
◆ High positioning accuracy
Due to the very low friction force during the movement of linear guides, which belongs to rolling friction, only minimal power is required to drive the platform. As the friction force is small, the heat generated by friction is minimal. Compared with traditional sliding methods, it can significantly reduce the wear of the contact surface of the running track, maintain high positioning accuracy, walking accuracy, and low wear for a long time.

◆ High rigidity
Due to the four-way equal load design of the slide rail and track probe, it is necessary to have sufficient resistance strength to loads from all directions, as well as the ability to automatically adjust the center, allowing for larger installation errors to make processing easier, and applying sufficient preload to achieve high rigidity.

TBI linear guide is easy to maintain and upkeep
Compared to traditional sliding systems, there are actions of shoveling or grinding the running track surface. The wear caused by sliding often requires the machine to be shoveled or ground again after a period of time, which is time-consuming and costly. Linear slides have interchangeability, and if replaced or repaired, the walking accuracy of the machine can be restored.

◆ TBI linear guide high-speed performance
Due to the contact between the slider and the track, as well as the rolling point of the steel ball probe, the friction coefficient is extremely small and heat is not easily generated. Therefore, only minimal power is required to drive the machine to operate. Because the required driving force is small and the power consumption is low, it is more suitable for high-speed operation than sliding devices.

◆ High mechanical efficiency without gaps
When preloading or working load is applied, the steel ball contacts at two points in the load direction, resulting in small differential sliding and good rolling motion, thereby improving efficiency.

TBI Linear Guide Product Display: