Characteristics and Applications of TS-3OOO Fluorescence Sulfur Analyzer TS-3000 UV Fluorescence Sulfur Analyzer

TS-3000S fluorescence sulfur analyzerIt is currently an advanced sulfur analyzer widely used to determine the total sulfur content in products such as finished oil, crude oil, distillate oil, petroleum gas, plastics, and petrochemical products.Compared with similar instruments at home and abroad, it has the characteristics of wide linear range, low detection limit, strong anti-interference ability, easy operation, stable and reliable results, high analysis accuracy, and good repeatability.Specialized quartz tube（Patent number: ZL 2010 0242233）Specialized cracking electric furnace（Patent number: ZL 2010 0242234）Obtained utility model patent certificate

instrumentcharacteristic:

v The instrument adopts the most popular international USB port communication, standard 24 bit data acquisition, and the minimum detection signal is less than 1 microvolt.

v Data can be stored, accessed, printed at will, and relevant problems can be solved based on on-site data files.

v The main components of the instrument are made of original imported components, which have better overall performance than similar domestic instruments and can replace imported products.

v The high voltage of the photomultiplier tube (PMT) can be adjusted arbitrarily, and the calibration of the standard curve can be done using single point or multi-point calibration, making it easy to operate.

v The software can run on all current operating systems and has strong adaptability. The instrument software has powerful functions.

Instrument execution standard:

v SH/T 0689, ASTM D5453 Determination of Total Sulfur Content in Light Hydrocarbons, Engine Fuels, and Other Oil Products (Ultraviolet Fluorescence Method)

instrumentTechnical parameters:

v Sample types: liquid, solid, and gas (with corresponding injectors required)

v Measurement method: UV fluorescence method (S)

v Measurement range: 0.2mg/L~5000ppm~percentage content

v Detection limit: 0.2mg/L (sulfur element)

v Repetitive error: ① 0.2mg/L ≤ X ＜ 1.0, ≤± 0.1mg/L;

② 1.0mg/L≤X＜100mg/L， ≤ 10%；

③ 100mg/L≤X≤10000mg/L， ≤ 5%

v Gas source requirements: High purity oxygen: above 99.98% High purity argon: above 99.98%

v Temperature control range: room temperature~1300℃

Instrument system configuration:

v Normal configuration:Complete set (including computer, quartz tube, liquid sampler, etc.);

v Imported accessories: photomultiplier tube (Japan), data acquisition card (USA), membrane dryer (USA), filter (USA), UV lamp (USA), etc;

v Optional accessories: solid sampler, gas sampler, quartz tube cracking, and various standard samples.