Taiwan Chengtai CNC lathe horizontal high-speed turning milling composite machine GLS-150 series-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13925801303
Address

No. 177, Xiaobian Road, Zhen'an East Road, Chang'an Town, Dongguan City, Guangdong Province

Contact Now

Taiwan Chengtai CNC lathe horizontal high-speed turning milling composite machine GLS-150 series

Horizontal turning milling compound machine

Contact Supplier

More Products

Product details

GLS-150 series

Important Elements	GLS-150	GLS-200	GLS-260
Maximum rotation diameter	Ø 500 mm
Bed saddle cover rotation diameter (front door)	Ø 380 mm
Maximum turning diameter * 1	Ø 400 mm / Ø 280 mm*2
Standard turning diameter * 1	Ø 165 mm	Ø 204 mm	Ø 254 mm
Maximum turning length * 1	500 mm / 340 mm*2
Maximum workpiece weight * 3	85 kg
COLLET SIZE	Ø 6"	Ø 8"	Ø 10"
Bar diameter	Ø 45 mm	Ø 51 mm	Ø 65 mm

main shaft	GLS-150	GLS-200	GLS-260
Main spindle aperture	Ø 56 mm	Ø 66 mm	Ø 76 mm
Main shaft bearing diameter	Ø 80 mm	Ø 100 mm	Ø 120 mm
Hydraulic cylinder diameter	Ø 6"	Ø 8"	Ø 10"
Spindle nose end	A2-5	A2-6	A2-8
Spindle Motor	β 8 / 8,000i	β 8 / 8,000i	β 12 / 7,000i
Motor horsepower (continuous)	7.5 kW ( 10 HP )		11 kW ( 15 HP )
Motor horsepower (30 minutes)	11 kW ( 15 HP )		15 kW ( 20 HP )
Motor full horsepower output speed	1,500 rpm	1,500 rpm	1,500 rpm
Spindle transmission mode	Driven by a straight belt
Spindle drive ratio	1 : one	7 : ten	7 : twelve
Spindle speed	60 ~ 6,000 rpm	42 ~ 4,200 rpm	35 ~ 3,500 rpm
Spindle full horsepower output speed	1,500 rpm	1,050 rpm	875 rpm

Concealed spindle motor (Selected)	GLS-150	GLS-200	GLS-260
Spindle Motor	α B112M / 15,000i	---	---
Motor horsepower (continuous)	5.5 kW ( 7.4 HP )	---	---
Motor horsepower (30 points/peak)	7.5 kW ( 10 HP )	---	---

Cs axis (optional)
C-axis motor	Spindle motor+Bz sensor Ø 125/MPCI-9051A
Minimum spindle positioning accuracy	0.001°
Dynamic accuracy	±0.02°

X&Z axis	GLS-150	GLS-200	GLS-260
Maximum X-axis travel * 1	220 / 215 mm ; [ 10-St. / 12-St. ]
Maximum Z-axis travel * 1	520 mm
X/Z-axis rapid feed	24 / 30 m / min.
Sliding rail type	Track
feed rate	1 ~ 4,800 mm / min.
X-axis servo motor	AC 1.2 kW (1.6 HP, FANUC β 8/3000i, absolute decoding, 1000000/rev)
Z-axis servo motor	AC 1.2 kW (1.6 HP, FANUC β 8/3000i, absolute decoding, 1000000/rev)
X-axis ball screw Diameter/Pitch	Ø 32 mm / 10 mm
Z-axis ball screw Diameter/Pitch	Ø 32 mm / 10 mm
X/Z-axis thrust (continuous)	448 kg

turret	GLS-150	GLS-200
Tower capacity	12 knives (choose 10 knives)	10 knives (choose 12 knives)
motor	FANUC AC servo motor
Tool changing speed	0.2 seconds (adjacent blades)/0.5 seconds 180 ° (opposite blade)
accuracy	Positioning: ± 0.00069 °, reproducibility: ± 0.00027°
Square shaped cutting tool	□ 20 mm	□ 25 mm
Circular cutting tool	Ø 32 mm	Ø 40 mm

Power turret (optional)	GLS-150	GLS-200	GLS-260
Maximum turning length	340 mm
Tower capacity	12
Power turret capacity	6 (simultaneous rotation of cutting tools)
Power tower motor power	AC 1.2 kW (1.6 HP, FANUC β 8/3000 is, absolute decoding, 1000000/rev)
Power turret motor torque	7 N-m [continuous]
motor	FANUC AC servo motor
Tool changing speed	0.2 seconds (adjacent blades)/0.5 seconds 180 ° (opposite blade)
Square shaped cutting tool	□ 20 mm
Circular cutting tool	Ø 25 mm
Power turret tool specifications	1 ~ 13 mm ER 20
Power turret speed	10 ~ 4,400 rpm

Y-axis (optional)	GLS-150	GLS-200	GLS-260
block type	Ø 280 mm
Maximum travel of X-axis	195 mm
Maximum Y-axis travel	70 mm = ± 35 mm
X/Y axis fast feed	24 / 10 m / min.
Sliding rail type	Track
feed rate	1 ~ 4,800 mm / min.
X-axis servo motor	AC 1.2 kW (1.6 HP, FANUC α 8/3000 i, absolute decoding, 1000000/rev)
Y-axis servo motor	AC 1.2 kW (1.6 HP, FANUC α 8/3000 i, absolute decoding, 1000000/rev)
X-axis ball screw Diameter/Pitch	Ø 32 mm / Pitch 10
Y-axis ball screw Diameter/Pitch	Ø 32 mm / Pitch 6
X/Y-axis thrust (continuous)	513 / 855 kg

Tailstock (optional)	GLS-150	GLS-200	GLS-260
Cone shaped hole inside the spindle	MT # 4 (active ejector pin)
Spindle diameter/stroke	Ø 70 / 150 mm
Tail seat body travel * 1	290 mm
Programmable control spindle /Tail seat body	Yes / No
Tail seat body movement mode	Hydraulic motor+gear rack; Servo motor+ball screw (optional)

General specifications	GLS-150	GLS-200	GLS-260
Positioning accuracy (X/Y/Z)	± 0.005 mm
Reproducibility (X/Y/Z)	± 0.003 mm
Standard controller	FANUC Oi Mate (using Oi TD)
Voltage/power demand	AC 200/220+10% to -15% 3-phase/26 kVA
Oil pressure tank capacity	50 L
Cooling water tank capacity	100 L
Cooling pump	0.5 kW ( 3/4 HP , 60Hz ) rated at 3 bar
machine weight	3,200 kg
machine weight (Y-axis model)	3,600 kg
appearance (Length x Depth x Height) * 1	2,260 x 1,490 x 1,675 mm
appearance (Length x Depth x Height) * 1	Y-axis model: 2,450 x 1,655 x 2,060 mm

High speed CNC turning center

Carrying industry-leading technology and high-quality parts, the Chengtai GLS series lathes combine high horsepower, fast processing, and high rigidity structure to provide efficient composite turning and milling capabilities. This series of CNC lathes can easily meet your cutting needs today and in the future. In addition, by using a power turret, C-axis, and Y-axis, composite machining functions such as turning, milling, and drilling can be performed on the same machine. It is also possible to perform contour milling on end faces and cylindrical surfaces

The 30 degree inclined bed structure makes it easy for operators to get up and down workpieces and smoothly discharge chips

The use of industrial grade rubber coated special steel sheets fused together into a scraper blade and stainless steel slide rail cover ensures the durability of the lathe

Fully covered protective sheet metal isolates turning iron chips from coolant inside the machine, providing you with a safe and clean working environment

The automatic lubrication system provides precise adjustment of lubricating oil for slides, ball screws, and other important components. The lubricating oil distribution system will automatically shut down during standby to avoid waste

Y axis

The use of Y-axis function makes the processing method of GLS series similar to that of a machining center machine equipped with a fourth axis rotating table. The X, Y, and Z axes are the same as the X axis of the machining center machine, The Y, Z, and C axes are the same as the fourth axis rotating table; This method of integrating lathes and machining centers into the same machine can significantly save manpower, processing time, floor space, and procurement costs of machines and fixtures, as well as reduce various uncertain factors caused by handling workpieces

Power Knife Tower

The use of power turret and C-axis control makes the GLS series a turning milling composite center, which can complete turning, milling, drilling, and tapping of a workpiece in the same lathe. Avoid errors caused by workpiece movement between machines and save processing time and manpower

Super strength structure

The bed with high-efficiency reinforced ribs is not only cast as a whole, but also made of high tension Mihanna cast iron and designed with heat flow balance, which can meet the needs of long-term processing and use. Due to the casting's ability to provide large shock absorption damping and reduce deformation, the machine is not only durable but also has outstanding performance

The main machine components are integrated into a strong foundation, with a low center of gravity body and a 30 degree saddle design providing an extremely stable base for the nose, turret, and tailstock

By using finite element analysis (FEM), the reinforcement ribs of the integrated bed platform were optimized, resulting in a 30% increase in mechanical strength compared to traditional designs. So the GLS series products can be used for heavy cutting and maintain long-term ultra-high precision. The high rigidity structure of the machine can extend the service life of the machining tools

processability

Specifications related to power turret

output power	1.2 kW ( 1.6 HP )
Motor Model	FANUC β8 / 3000 is
Maximum drilling capacity	M8 * P1.25
Maximum milling capacity	Ø 12 * 10 mm
Gear ratio	22 : fifteen

Composite milling capability

	cutting tool	Spindle speed ( rpm )	Cutting rate ( mm / min. )	Cutting Speed ( m / min. )	Cutting Depth ( mm )
drill	Ø 13 HSS	650	65	26.5	not have
End mill cutter	Ø 12 HSS end drill	600	60	not have	0.39
TAPPING	M8 * P1.25	600	750	15	not have

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content