Marposs NVH G-EAR tester, that works on theSingle Flanktesting principle of one master gear meshing with the component under inspection, is able to detectmacro-geometry(nicks, runout etc.) andmicro-geometry(gear mesh excitation, ghost orders) defects that are responsible ofgear whineandnoisephenomena.

The ability of achievinghigh valuesoftorqueandrotational speedand the possibility to adjust them at will during testing, is one of the major benefits of the application, which allows testing the gears at operating conditions almost comparable to those found in the final e-Drive.

A robustgranitebase frame to become non-sensitive to external interferences and disturbances and a highly configurable software make Marposs NVH gear tester at the forefront of technology in the sector, capable of correlating data with theEnd Of Linetest rig.

The output parameter is theangular acceleration(rad/s²) evaluated instantaneously and in the long run.

The signal of the sensor is elaborated to obtain the FFT spectrum to show the amplitude of the frequencies of vibrations.

The spectrum normally shows a range of frequencies related to thegear meshing frequenciesand relevantsidebands, whose amplitude is usually related to the transmitted load. Unexpected high amplitude are related to ripples.

CHALLENGING TESTING CONDITIONS

The machine has the capability to measure gears at highly demanding testing conditions. As a matter of fact, the system offers the possibility to set the operating conditions in the range0-3000 rpm(rotational speed) and0-40 Nm(torque).

WIDE OPERATIONAL RANGE

The system has the capability to measure gears and shafts with maximum part length350 mmand maximum diameter250 mm, offering to our customers the opportunity to accommodate in one single piece of equipment the regular gear production range.

ADAPTABILITY TO PROCESS NEEDS

Design protect for both manual and automatic (in-line) part loading.

QUICK CYCLE TIME

A very quick cycle time, in the range of 20-30 seconds, is perfect for in-line 100% check integration.

INSENSITIVE TO EXTERNAL VIBRATIONS

A granite base frame allows to insulate the machine from environment and other external disturbances.

HIGH LEVEL OF ACCURACY

Noise data are consistent with End of Line test rigs and analytical laboratory inspection.