Thermal Manikin warm body dummy model system device

The main features of Thermal Manikin, a warm body dummy model system device:

1. The human body model is divided into 17 anatomical segments, including the head, trunk, and limbs. Each segment is equipped with insulated and fine tuned heaters, and constant power control can achieve surface heating and constant temperature control.
2. In the control software section, various measurement data and records can be processed and statistically analyzed, including the internal heat of the human body model, the temperature insulation performance of clothing, as well as the surface temperature evaluation and heat dissipation calculation of the human body model.
When making a human body model, resin with low heat capacity is used to quickly handle the thermal reactions and heat exchange processes of the human body model.
4. Thermal nickel wire sensor, connected to the entire system, can measure the average temperature with good sensitivity in each section.
5. The joints, shoulders, and knees can be bent and changed to stand or sit, making it easy to remove clothes.
6. Equipped with a lifting frame for the human body model, it can be easily moved.

Thermal Manikin Technical Parameters for Warm Body Dummy Model System Device:

Human body model part
Material: Fiberglass resin.
Appearance: Skin without luster baked (radiation rate: 0.9).
Heating system: Thermal resistance method.
Temperature sensor: Install temperature sensors on each section.
Heat: 0-5Met per segment (0-290W/m2).
environment 20 ° C~60 ° C.
Joints: Shoulders, femurs, and knees.
Cable: behind the head.
Weight: Approximately 25 kilograms.

Controller section
Measurement method: Constant temperature control or constant power control.
Overheating protection: When the temperature exceeds 60 ° C, it automatically shuts off.
Heater power: DC48V。
Emergency stop: One click button to turn off the heater.