Titanium rod filter manufacturerProduct Introduction

The filter element is made of titanium powder sintered rod, which has the characteristics of high flow rate, high precision, high temperature resistance, corrosion resistance, non toxicity, no particle shedding, and long service life. The shell material is imported 316L or 314, and the inner surface is polished with a surface roughness of Ra0.4 μ m. The inlet pipe adopts a clamp type, which is easy to fold and wash. At the same time, the cylinder can be flipped 180 degrees to achieve * cleaning.

Titanium rod filter manufacturerapplication

This filter has the characteristics of high pressure, strong acid, strong alkali, corrosion resistance, and the filter element can be repeatedly regenerated and used. It is a hollow filter tube made by processing titanium metal powder through powder metallurgy without high-temperature sintering. It is widely used in liquid-solid separation in industries such as food, beverage, medicine, and chemical engineering, and is particularly suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. This series of products has a compact structure, beautiful appearance, and is produced according to GMP standards. The pipe fittings are connected using standard quick release connections, which are easy to disassemble and clean.

Product parameters

Filtering accuracy: 0.5 μ m~30 μ m

Flow rate: 0.05T/h~10T/h

Precautions for use

1. Avoid scratches, collisions, dust, and oil stains.

During use, its working pressure should not exceed the rated working pressure.

During normal use, there should be at least 3-5 minutes of low-pressure start-up time, and the relative pressure difference should be controlled below 0.5Mpa. Then gradually adjust the working pressure to the normal requirement (high pressure should not exceed 0.4Mpa).

After a certain period of operation, this product may experience an increase in pressure and a decrease in flow rate due to clogged filter elements, requiring backwashing or backwashing regeneration. The regeneration cycle depends on the rated pressure and flow rate.