Total Cobalt Online Analyzer-Global supplier

6F, Building B, Jiangsu International Technology Transfer Center, No. 8 Xintai Road, Xinwu District, Wuxi

Wuxi Dianchuang Technology Co., Ltd.'s total cobalt online analyzer is widely used in industrial and agricultural wastewater treatment plants, drinking water treatment plants, lake water, and seawater analysis, which can timely reflect the degree of water quality pollution.

总钴在线分析仪

CHARACTERISTICS
The unique design of the total cobalt automatic detector enables this product to have a lower failure rate, lower maintenance, lower reagent consumption, and higher cost-effectiveness compared to similar products.Optical components: Choose the rare dual beam used in domestic online monitoring instruments, which is not affected by various environmental factors during detection. Automatically correct system errors, improve instrument measurement accuracy, stability, and repeatability. Select valve components: use original imported components from the United States, Japan, or Germany. International mainstream fluid components with smaller dead volume and simpler operation. Measurement component: Accurate measurement of reagents is achieved through a visual photoelectric system, overcoming quantitative errors caused by wear of peristaltic pump tubes; At the same time, precise quantification of trace reagents has been achieved, with each dose being only 1-5 milliliters, greatly reducing the amount of reagents used.

Sample injection component: Peristaltic pump negative pressure suction, there is always an air buffer zone between the reagent and the pump tube to avoid corrosion of the pump tube. Sealed digestion component: High temperature and high pressure digestion system accelerates the reaction process and overcomes the corrosion of equipment caused by the volatilization of corrosive gases in open systems. Reagent tube: Imported modified PTFE transparent hose with a diameter greater than 1.5mm is used to reduce the probability of particle blockage in water samples. Signal processing: The instrument adopts imported high-precision analog-to-digital conversion chips, greatly enhancing the scalability of the core board, adapting to various usage environments, and making the operation of the instrument easier and more user-friendly. Temperature control: Imported temperature measuring components are used to form a precise temperature control system, and temperature compensation technology is adopted to overcome the influence of temperature drift and ensure that the sample reaction conditions are more in line with requirements.
总钴在线分析仪

IITotal Cobalt Online AnalyzerTechnical Parameter

Technical Parameter	Data indicators	Parameter Description	notes
measureQuantity range	0-0.5 mg/L (can be expanded according to actual conditions)	Can be expanded according to actual situations	Abnormal alarms and power outages will not result in data loss. Touch screen display and command input. After abnormal reset and power failure, the instrument automatically returns to power Automatically discharge residual reactants and restore working status.
Measurement period	The measurement cycle is 30 minutes
refinedAccuracy	±10%
repeatability	±10%
sampling period	Time interval and hourly measurement mode	Adjustable from 1 to 9999min
calibration cycle	Adjustable at any interval and time from 1 to 99 days
Maintenance Cycle	Usually once a month, about 60 minutes each time
Environmental requirements	For indoor environments with adjustable temperature, it is recommended to have a temperature range of+5-28 ℃; Humidity ≤ 90% (non condensing)	No condensation
size	Height 1350 x Width 500 x Depth 400mm
power supply	AC220±10%V，50±10%Hz，5A
output	RS-232, RS485, 4-20mA or 0-5V

3、 Advantages of Total Cobalt Monitoring Equipment
1. The entire software system framework and external facilities of the instrument make human-computer interaction more convenient and functional applications more complete;
2. The pollution caused by different water quality on special sites during the instrument measurement process can be set in real-time, greatly reducing the instrument failure rate caused by this problem and making the measurement data more accurate;
3. The instrument has an automatic calibration mode. After automatic calibration, the instrument returns to automatic mode and runs according to the user's set parameters, without the need for staff to monitor the entire process, greatly reducing maintenance time and improving maintenance efficiency;
4. Instrument measurement of water samples is divided into online mode (i.e. automatic mode) and offline mode (i.e. manual mode). In offline mode, calibration tubes are used for measurement, without the need to remove the water sample tube from the sampling port or cup, making maintenance more convenient;
5. The instrument can store 10000 pieces of data and the data can be exported with just one click;
6. The online mode (i.e. automatic mode) and offline mode (i.e. manual mode) of the instrument store data independently, and the offline mode data is not uploaded to the data acquisition instrument, avoiding the impact of instrument maintenance on uploaded data.
Total Cobalt Online Analyzer: http://www.wxdct.cn/c_html_products/1013-415.html

Attachment: Instruction Manual for Total Cobalt Online Analyzer