Tri color printing machine

A conveyor rack
1. Welded frame channel steel
2. It has a side positioning function
3. Transmission power 0.75KW
4. Conveyor belt drive
Printing unit
1. The body is welded from 100 * 100 square tubes and steel plates
2. Each set of printing rollers has a liquid cleaning function
3. There is a drying box between every two printing units, with a power of 0.5KWx3. And bring a hair dryer to dissipate heat, which can shorten the drying time.
5. Ink is supplied by a pneumatic ink pump
6. The printing roller cleaning function is supplied by a pneumatic pump, and the cleaning solution is cleaned by a scraper
7. Conveyor belt drive
Glazing unit
1. The body is welded from 100 * 100 square tubes and steel plates
2. It consists of one positive and one negative light roller, each with a separate motor to control the coating thickness of the light oil
3. UV varnish is supplied by a pneumatic ink pump
4. Conveyor belt drive
Heating and leveling conveyor unit 15M
1. The rack is welded from Q235 channel steel
2. Heating power is 0.5KWx9
3. Conveyor belt drive
4 5MX3
UVCuring unit
1. The rack is welded from channel steel
2. The conveyor belt is driven by a stainless steel mesh belt
3. There are 3 sets of 5.6KWx3 light tubes
4. The curing box is equipped with a cooling fan (550W * 2)
Machine configuration:
1. Motor: Conveyor frame, leveling heating, curing machine motor is a cycloidal pinwheel reducer
The motor for cleaning, printing, and polishing uses a worm gear aluminum motor
3. The low-voltage electrical equipment of the whole machine uses Chint Electric
5. The plate roller is Kaihua plate making (steel roller); Cleaning, polishing, and printing rollers are made of polyurethane rubber rollers
6. Use pneumatic diaphragm pump to supply ink and liquid