Product Name: Ultra high temperature instantaneous sterilization machine

This equipment is applicable to the instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverage, ice cream, ice cream slurry, soy sauce, soybean milk, condensed milk, alcohol, etc., as well as the sterilization of fluid materials. The feeding and discharging of this equipment are both equipped with three-way plugs, and the flow rate can be adjusted as needed, ensuring reliable use.

Working principle: Generally, materials are preheated by being pumped into the sterilization machine by a centrifugal pump into the hot and cold material heat exchange device. Then, they are quickly heated to the sterilization temperature through a high-pressure high-temperature barrel and maintained at about3In seconds, the microorganisms and enzymes inside are quickly killed. After the material is discharged from the high-temperature barrel, it is cooled by heat exchange with the cold material, usually at a temperature lower than65℃. If the temperature needs to be increased in the next process, it can be achieved by adjusting the angle type shut-off valve or circulation, etc. Otherwise, the discharge temperature can be reduced by connecting cooling water. The discharge is controlled by a throttle valve, which can keep the boiling point of the material above the maximum temperature while maintaining a certain pressure. During normal production, adjust this valve to generate back pressure control flow by overcoming spring pressure with the driving force of the pump. When cleaning and sterilizing the machine, it should be fully opened. The circulating storage tank can be used to prepare acid-base solutions and effectively clean the scale on the inner wall of the coil. Due to the simultaneous use of stainless steel three-way plugs, the flow rate can be appropriately adjusted.

characteristic:1Continuous production with extremely short sterilization time.

　　2Due to the short heating time, high-quality products can be obtained.

　　3Due to the use of ultra-high temperature sterilization, the sterilization effect is particularly good.

　　4Used in series with centrifugal pumps or high-pressure homogenizers, it has a wide range of applications and is suitable for sterilizing high viscosity materials.

　　5Due to the economic effect of waste heat utilization in the design of heat exchangers with hot and cold materials, the steam consumption is small.

This device has seven advantages over traditional sterilization equipment:

1、 Can reduce equipment investment50% ~70%(No need for boilers, no boiler room or boiler ancillary facilities);

2、 Reduce the overall cost of the product40%~60%(Sterilization power consumption)22~24kW/Ton of product,No coal consumption)；

3、 Save manpower2~3Reduce the number of operators, including stokers, by a factor of several;

4、 Save space90%~95%(No need for boiler room, the equipment itself occupies a small area and has no ancillary equipment);

5、 No emissions of "three wastes", protect the environment, and achieve green factories;

6、 The sterilization temperature is high and the time is short, which can maximize the preservation of the natural flavor of the product and reduce the loss of beneficial nutrients for the human body;

7、 Replace outdated traditional boiler steam sterilization technology with high-tech sterilization technology.