VIP member
UV radiation safety table
6D is a laboratory and industrial grade handheld measuring instrument used for measuring the harm of ultraviolet radiation to the eyes and skin. For a
Product details
Product Introduction:
6D is a laboratory and industrial grade handheld measuring instrument used for measuring the harm of ultraviolet radiation to the eyes and skin.
For any industry exposed to ultraviolet radiation, 6D is a valuable security tool. Its sensitivity conforms to the requirements ofAmerican Conference of Governmental
6D is a laboratory and industrial grade handheld measuring instrument used for measuring the harm of ultraviolet radiation to the eyes and skin.
For any industry exposed to ultraviolet radiation, 6D is a valuable security tool. Its sensitivity conforms to the requirements ofAmerican Conference of Governmental
The UV radiation hazard standard issued by Industrial Hygienists (American Association of Government Industrial Hygienists). These standards stipulate that the total 270nm UV exposure within 8 hours cannot exceed 3 millijoules per square centimeter.
The safety table monitors the overall effect of all ultraviolet light emitted by the light source.
Technical parameters:
·Spectral response follows the ACGIH (Association of Governmental Industrial Hygienists) SWF recommendation of 250 to 400 nm
·60 degree viewing angle
·Reading range 0.03 hours to 10.00 hours
·Operating temperature: 0 to+40 ° C
·Power 9V alkaline battery (200 hour battery life)
·Size 6 x 3.2 x 1.5 "(15 x 8 x 3.8 cm)
·Weight 7 oz (200 grams)
Application:
·UV curing industry
·Printing
·Spectral measurement
·Environmental testing
·Welding
·Commercial lighting
·Semiconductor processing
·Clinical application of sterilization lamp
Technical parameters:
·Spectral response follows the ACGIH (Association of Governmental Industrial Hygienists) SWF recommendation of 250 to 400 nm
·60 degree viewing angle
·Reading range 0.03 hours to 10.00 hours
·Operating temperature: 0 to+40 ° C
·Power 9V alkaline battery (200 hour battery life)
·Size 6 x 3.2 x 1.5 "(15 x 8 x 3.8 cm)
·Weight 7 oz (200 grams)
Application:
·UV curing industry
·Printing
·Spectral measurement
·Environmental testing
·Welding
·Commercial lighting
·Semiconductor processing
·Clinical application of sterilization lamp
Configuration structure:
6D UV safety gauge is a handheld measuring instrument equipped with a detector at the top. Control through sliding switch. The maximum safe exposure time is displayed on the LCD. The 10 hour recording result shows whether the light source can reach the threshold value within 8 hours of working time.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-