Ultrasonic cleaning machine intensity tester [sound pressure gauge], used for measuring the cleaning intensity of ultrasonic waves

MUEl8TUltrasonic sound pressure gauge is a multifunctional instrument for measuring the intensity of ultrasonic waves in liquids. The traditional ultrasonic cleaning industry relies on visual observation to make rough judgments, or uses tin foil for rough testing. However, factors such as ultrasonic frequency and water quality have a significant impact, making it difficult to distinguish the actual intensity.MUEl8TUltrasonic sound pressure gauge can solve the above problems. Provided an objective and reliable measurement method for the industry. It can be widely used for production quality monitoring, quality management, engineering experiments, equipment calibration and inspection, and other purposes.

MUEl8TUltrasonic sound pressure gauge，It has good frequency characteristics and appropriate sensitivity. exist1KHz~300KHz Within the frequency range(If higher frequency measurement is required, our company can also make special measurements as needed)Within this region, there is an almost flat exponential frequency response characteristic;The range of intensity measurement is determined by0~5OOmVrmsMinor changes inside can be detected, and the linear distortion is minimal. The output reading is stable and easy to read. Therefore, it can accurately test and compare the ultrasonic sound pressure output intensity of various situations in liquids.

MUEl8TUltrasonic sound pressure gauge, with multiple signal interfaces and monitoring functions, such asALARM SETSelection and setting of monitoring intensity, monitoring signal terminals,DCSignal terminal,MONITORSignal terminals have multiple uses such as measurement, recording, and monitoring, and are indispensable tools and equipment for the ultrasonic industry to pursue quality management.

1. Multi functional instrument for measuring ultrasonic intensity in liquids

2. The frequency characteristics are very good, better than foreign products

3. Almost flat frequency response characteristics in the range of 1 kHz to 300 kHz

4. Can accurately test and compare the strength of liquids under various conditions

5. The intensity measurement range can vary from 0 to 500mVrms

6. It has dual functions of measuring and monitoring the working status at the same time

7. In a strong acid environment, a specially designed acid resistant testing rod can be used

8. Rechargeable, this device can freely move and measure

Main functions

1. (MONITOR) output connector: Can be connected to an oscilloscope and a frequency meter to observe wave pressure, clutter, and frequency changes in the liquid.

2. (DC O/P) output connector: Can be connected to a computer to record changes in strength in liquid. It can also be connected to a constant voltage ultrasonic oscillator to control the ultrasonic intensity in the liquid.

3. (ALARM) output connector: It can be connected to the monitoring circuit, and with the AL SET knob on the back panel of the instrument, it can adjust the monitoring function of setting the lower limit value of the intensity.

4. Intensity measurement range: The 0-500 mVrms indicator (10mV, 50mV, 100mV, 500mV) has four levels to choose from for quantitative management of production line standards.

Ultrasonic cleaning machine strength testerProduct specifications

type name:MUEl8T

Working power supply:AC220V, 60Hz(AC220VAfter inserting the plug into the power supply,Opening the battery switch will automatically charge the internal battery,After unplugging the power cord,Can become a mobile measuring instrument)

power consumption:less than3W

defend a place difficult of access silk: 0.3A

Frequency range:1KHz-300KHz(Higher frequency products accept special customization)

measuring range: 0-500 mVrms

(divided into10mV、50mV、100 mV、500 mVFourth gear)

Factory sensitivity setting value:12mV1 mV (28KHz 1200WVibration plate as the source of vibration)

(pour:Reference benchmark for sensitivity:With one28KH_Z1200WThe vibrating plate is placed in the center of the plastic groove, and the vibrating machine is adjusted to the best state, with a water depth of about the vibrating plate surface20cmTime measurement)

Setting error:less than10% (ALARM SET)

ALARMoutput:less than0.5 ohm (Red and white output wiring)

DCsignaloutput: 2.0~2.3V (Output reading100%)

MONITORoutput:1.2V0.1V (Output reading100%)

Host size: 160x 195 x90 mm ( WxLxH )

weight measure: 860g (host)+170g (test bar)

If there are any changes to the specifications, no further notice will be given.

.Standard accessories

1. One ultrasonic sound pressure gauge(model:MUEl8T)

2. test bar(Itype)one piece of(model:MUEl8T-I01 )

3. One signal line(model:MUEl8T-C01 )

4. One user manual(model:MUEl8T-M01 )

5.Accessory parts(Purchase separately)

1.test bar(Ltype)one piece of(model:MUEl8T-L01 )