WL-1A1- Ultrasonic open channel flowmeter is cheap, welcome to purchase!

WL-1A1 Ultrasonic Open Channel Flow MeterStandard weirs are used as auxiliary measurement methods, mainly including: full width weirs, rectangular weirs, triangular weirs, Paschal troughs, and P-B troughs. Currently, the Paschal trough is more commonly used. The entire open channel flowmeter consists of three parts: a converter, a weir tank, and an ultrasonic level gauge.

WL-1A1 Ultrasonic Open Channel Flow MeterIn a smoothly flowing open channel, a measuring weir channel converts the flow rate into the level of liquid. By measuring the water level, the flow rate can be calculated backwards. Install a measuring weir groove in the channel to generate throttling effect, so that the flow rate in the open channel has a fixed correspondence with the liquid level. This correspondence mainly depends on the structural dimensions of the water measuring weir, and the influence of the channel is minimized. Non contact measurement: The sensor is not in contact with the fluid and is not corroded or contaminated by sewage. Strong corrosion resistance, good waterproofing, and moisture resistance.

0.0001m3/s～10m3/s
WL-1A1 Ultrasonic Open Channel Flow MeterLiquid level measurement range
（0～5）m
**Degree
≤3%
Repeatability error
≤±1%
Range Accuracy
±3mm
Water level resolution
1mm
Weir channel material
Ordinary steel, stainless steel, cement, fiberglass, plastic, etc
Upper and lower limit alarm
Relay output, normally open node
work environment
Temperature: -10 ℃ to+45 ℃; Humidity:<85% (RH)
power supply
AC: 220V 50Hz 10W, DC: 12V 600mA
anti-interference ability
Lightning protection, anti electromagnetic interference