The drying and dehumidification control adopts microcomputer control and P.I.D. temperature control.

LCD display, button operation.

The drying and dehumidification control can be switched between Chinese and English, with a simple and easy to understand operating interface, and clear text display of fault issues.

Adopting a dual cooler structure to ensure lower return air temperature, the honeycomb can reach a dew point below -40 ° C, and with enhanced chilled water configuration, it can even reach a dew point of -50 ° C or even lower.

Optional PLC human-machine interface.

Dew point meter can be optionally selected.

Product specifications are subject to change without prior notice.

The main reason for poor quality such as bubbles, silver lines, cracks, flow marks, and poor transparency is that the plastic is not fully dried before it is formed. Engineering plastics such as PA, PC, PBT, PET, NYLON, etc., which have strong moisture absorption properties, cannot be completely dried by traditional dryers due to the infiltration of moisture into the plastic particles.

2. It has been proven through practice that reducing the dew point of the drying air to below -40 ℃ while controlling the heat to blow over the surface of the wet plastic particles is necessary to reduce its moisture content to below 0.02% before molding. The honeycomb dehumidifier uses a honeycomb wheel in a closed circulation system to fully dehumidify the air and quickly remove the moisture from the plastic particles to achieve the effect of dehumidification and drying.

Product specifications are subject to change without prior notice.