characteristic:

1) All materials are evenly mixed by weight measurement, and the ratio can be strictly controlled, with a precision reading of 0.3%.

2) By adopting PLC control system and advanced batching calculation method, the weight of each raw material can be accurately controlled and measured.

3) The automatic repeat calibration function will automatically calibrate after each weighing to ensure accurate measurement accuracy.

4) It can be directly installed on the molding machine, but an adapter base should be selected.

5) It can handle up to four types of raw materials and has formula storage function, which can store up to 30 sets of formulas.

6) Detachable design, easy to clean.

7) The standard equipment for material feeding control of the entire series of models is the cylinder driven sliding plate mechanism, but if the processing capacity is very small (less than 70 grams per batch per single barrel), it can be replaced with an optional device for "screw output".

8) When the machine is used for ground installation, it needs to be equipped with a combination of pneumatic cut-off valve, tripod, storage bucket, and suction box.

Note: The above parameters are typical reference values, and the specific settings are determined based on the characteristics of the raw materials and production requirements

Product specifications are subject to change without prior notice.