VIP member
VMC1055 Vertical Machining Center
Product model: VMC1055 Workbench area: 1300 × 550 Working stroke: 1100x600x550
Product details
Technical parameters of VMC1055 vertical machining center:
Main component suppliers
Note: The above are the suppliers of the main parts of the machine tool Our company needs to replace the manufacturer's parts due to technological transformation But the quality of the replaced parts shall not be lower than the original zero
The quality level of the item.
Standard machine function
optional function
| model | VMC1055 | ||
| Project | Unit | Numerical value | |
| trip | X-axis | mm | 1000 |
| Y-axis | mm | 550 | |
| Z-axis | mm | 550 | |
| Spindle nose table surface | mm | 120~720 | |
| Distance from column guide surface to spindle center | mm | 800 | |
| workbenches | size | mm | 1300*550 |
| T-shaped groove (width x number of grooves x spacing) | mm | 5-18-110 | |
| Large load capacity (evenly distributed) | Kg | 600 | |
| main shaft | Spindle speed | r.p.m | Belt type 8000 (standard) |
| Spindle transmission mode | Belt type (standard) | ||
| conicity | # | BT-40 | |
| move | Three axis rapid movement | m/min | 36*36*18 |
| Cutting feed | mm/min | 1-8,000 | |
| Small input unit | mm | 0.001 | |
| Positioning accuracy mm | mm | JIS± 0.005/300mm | |
| Repetitive positioning accuracy mm | mm | JIS± 0.003mm | |
| Disc type knife magazine (ATC) |
Number of cutting tools | grasp | 24 |
| Knife handle specifications | BT-40 | ||
| Knife selection method | Bidirectional arbitrary | ||
| Tool exchange time | sec | T-T：2.8sec | |
| Tool changing device | Automatic tool change | ||
| Weight of large cutting tools | Kg | 8 | |
| electrical machinery | main shaft | KW | 11 |
| Z-axis | KW | 3.5 | |
| X/Y axis | KW | 2.2 | |
| X. Y, Z guide rails | Screw form | Ball screwØ 40/P12/C3 | |
| Sliding block form | XY roller track 45mmx4 slider,. Z ball track 55mmx6 slider | ||
|
Fuel tank capacity |
Cutting fluid water tank | L | 250 |
| lubrication system | L | 1.7 | |
| Numerical Control System | model | FANUC 0iMF | |
| other | power capacity | KVA | 25 |
| Weight | KG | 8000 | |
| Air pressure demand | KG | ≧6 | |
| Area requirement (L * W * H) | mm | 3200*2480*2800 |
Main component suppliers
| Serial Number | product name | manufacturer | country of origin |
| 1 | controller | FANUC | Japan |
| 2 | spindle | FANUC AC servo motor | Japan |
| 3 | X. Y, Z-axis motors | FANUC AC servo motor | Japan |
| 4 | spindle bearing | NSK (P4 level) | Japan |
| 5 | X. Y, Z-axis bearings | Silver/TPI (P4 level) | Taiwan |
| 6 | X. Y, Z ball screw | Shangyin/Yintai (C3 level) | Taiwan |
| 7 | X. Y-axis and Z-axis guide rails | Shangyin/Yintai (P level) | Taiwan |
| 8 | drive belt | Jianchun | Taiwan |
| 9 | Telescopic cover | Daheng | domestic |
| 10 | main shaft | Jianchun | Taiwan |
| 11 | coupling | Martha | Taiwan |
| 12 | Knife cylinder | AirTAC | Taiwan |
| 13 | Spindle cooling system | Gao Wen/Bo Ying Te | Taiwan |
| 14 | Electrical box heat exchanger | Gao Wen/Bo Ying Te | Taiwan |
| 15 | Cutting cooling motor | Da Jing/Hua Le Shi | Taiwan |
| 16 | Three point combination | mindnan | Taiwan |
| 17 | Central lubrication system | river valley | Taiwan |
| 18 | Disc type knife magazine | Okada (BT-40) | Taiwan |
| 19 | Overload protector | schneider | Germany |
| 20 | Proximity Switch | Omron Corporation | Japan |
Note: The above are the suppliers of the main parts of the machine tool Our company needs to replace the manufacturer's parts due to technological transformation But the quality of the replaced parts shall not be lower than the original zero
The quality level of the item.
Standard machine function
| Serial number | Project |
| 1 | Steel attack teeth |
| 2 | External handheld pulse generator |
| 3 | Tool cooling system |
| 4 | Sealed electrical box and heat exchanger |
| 5 | X. Y, Z-axis full face telescopic cover |
| 6 | LED Working Light |
| 7 | Tri color alarm indicator light |
| 8 | special tools |
| 9 | Adjust the cushion block and bolt |
| 10 | Transformer [380V/50HZ] |
| 11 | Water tank&chip storage tank |
| 12 | Belt type spindle 8000 RPM |
| 13 | Automatic Lubrication System |
| 14 | Three axis feed anti-collision system |
| 15 | Factory Inspection Record Form for Machine Tools |
| 16 | System Chinese Operation Manual and Machine Tool Operation Manual |
optional function
| Serial Number | project |
| 1 | Power stabilizer |
| 2 | Main spindle center water outlet |
| 3 | Direct spindle BT-40 12000RPM |
| 4 | Spindle oil cooler |
| 5 | Fourth axis (indexing plate) |
| 6 | oil water separator |
| 7 | Automatic measurement of cutting tools |
| 8 | Tool breakage detection |
| 9 | Crawler chip conveyor&chip collection vehicle |
| 10 | Base chip flushing device |
| 11 | Automatic power-off system |
Introduction and Application of VMC1055 Machining Center:
This product is a semi closed loop CNC milling machine with X, Y, and Z three-axis servo control. The structure and external dimensions are compact and reasonable, and the spindle is driven by a servo motor. It can achieve drilling, milling, boring, expanding, reaming, tapping and other processes for various complex parts such as disks, plates, shells, molds, etc. in one clamping, suitable for parts processing in industries such as automotive parts, electrical instruments, motorcycles, tools, hardware, motors, etc. It can be used for the processing and manufacturing of small and medium-sized parts, showing its superiority in the processing of complex and high-precision parts. It can also form an automatic production line for large-scale production to ensure the product quality and production of parts.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-