VIP member
Product details
VMC1168 Vertical Machining CenterThe main foundation components such as the base, slide, worktable, column, and spindle box are made of high rigidity cast iron structure, with reinforcing ribs distributed inside the base. The slide is a box type structure, ensuring the high rigidity and bending and shock absorption performance of the foundation components. The column adopts a column structure, with a stable foundation and good rigidity; The basic components are molded with resin sand and undergo aging treatment to ensure the stability of the long-term accuracy of the machine tool, providing a guarantee for the stability of the machine tool performance.
Technical parameters of VMC1168 vertical machining center:
| unit | data | |
| Workbench area (width x length) | mm | 600×1200 |
| t-slot | mm | 5-18-110 |
| T-groove spacing | mm | 100 |
| Work with a large load-bearing capacity | kg | 800 |
| Left and right travel (X-axis) | mm | 1100 |
| Front and rear travel (Y-axis) | mm | 600 |
| Up and down travel (Z-axis) | mm | 600 |
| Distance from spindle center to column guide surface | mm | 650 |
| Distance from spindle end face to worktable | mm | 120-720 |
| Spindle hole taper | BT40 | |
| Range of spindle speed | r/min | 10000 |
| Main motor model | ZJY208A-11BM-B5 | |
| Rated power of servo main motor | kw | 11 |
| 30 minute locked rotor power of servo main motor | kw | 15 |
| Rated output torque of servo main motor | Nm | 110 |
| Dynamic balancing method of spindle components | G1 | |
| Spindle Precision | Spindle end face runout: 0.005mm | |
| Radial runout of spindle: proximal 0.007mm | ||
| Knife handle standard | MSA403 BT40 | |
| Pull nail standard | MSA403 P40T-1 | |
| X/Y-axis feed motor model | ||
| X/Y-axis feed motor high speed | r/min | 3000 |
| Rated power of X/Y-axis feed motor | kw | 3 |
| Rated output torque of X/Y-axis feed motor | Nm | 22 |
| Z-axis feed motor model | 175SJT-MZ180B | |
| High speed Z-axis feed motor | r/min | 3000 |
| Rated power of Z-feed motor | kw | 3 |
| Rated output torque of Z-feed motor | Nm | 22 |
| Fast movement of X/Y axis | m/min | 24 |
| Z-axis rapid movement | m/min | 24 |
| feed rate | mm/min | 100000 |
| Type of knife magazine | 24 robotic arms | |
| tool magazine | grasp | 24 |
| Full knife, large tool diameter | mm | Ф78 |
| Large tool diameter adjacent to the empty knife | mm | Ф160 |
| Maximum allowable weight of cutting tools | kg | 8 |
| Maximum allowable length of cutting tools | mm | 300 |
| Tool change time | s | 1.8sec/60Hz |
| Knife selection method | Bidirectional forward and reverse rotation, arbitrary knife selection | |
| Total electrical capacity of machine tool | KVA | 20 |
| Cooling pump flow rate | L/min | 40 |
| Compressed air for machine tools | kg | 6~8 |
| Power requirements | 380V±10% 50Hz | |
| Ambient temperature requirements | 0℃～40℃ | |
| relative humidity | 20%～80% | |
| Machine tool dimensions (approximately) | mm | 3300×2650×2800 |
| Machine weight | kg | 7500 |
| Shield machine | Fully enclosed | |
| X/Y/Z positioning accuracy | mm | ±0.005 |
| X/Y/Z repeated positioning accuracy | mm | ±0.003 |
| Guideways Type | X (45), Y (45), Z (45) wire gauge, roller | |
| Chip removal direction | front row | |
| oil-water separation | Desktop oil-water separation structure | |
| cleaning method | Manual air gun | |
| Chip flushing method | Blow air and flush water at the front end of the spindle | |
| Spindle protection | Air curtain protection | |
Standard machine function
| Serial number | Project |
| 1 | Steel attack teeth |
| 2 | External handheld pulse generator |
| 3 | Tool cooling system |
| 4 | Sealed electrical box and electrical box air conditioning |
| 5 | X. Y, Z-axis full face telescopic cover |
| 6 | LED Working Light |
| 7 | Tri color alarm indicator light |
| 8 | special tools |
| 9 | Adjust the cushion block and bolt |
| 10 | Transformer [380V/50HZ] |
| 11 | Water tank&chip storage tank |
| 12 | Belt type spindle 6000 RPM |
| 13 | Automatic Lubrication System |
| 14 | Three axis feed anti-collision system |
| 15 | Factory Inspection Record Form for Machine Tools |
| 16 | System Chinese Operation Manual and Machine Tool Operation Manual |
| 17 | Spindle oil cooling |
| 18 | Chain type chip conveyor |
| 19 | punchings |
| 20 | Pneumatic door device |
optional function
| Serial Number | project |
| 1 | Power stabilizer |
| 2 | Main spindle center water outlet |
| 3 | Direct spindle BT-50 |
| 4 | Automatic power-off system |
| 5 | Fourth axis (indexing plate) |
| 6 | oil water separator |
| 7 | Automatic measurement of cutting tools |
| 8 | Tool breakage detection |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-