VIP member
VMC850/V85 vertical machining center
Product model: VMC850 Workbench area: 450 × 900 Working stroke: 800x500x500
Product details
Features of VMC850 machining center:
1. The main foundation components such as the base, slide, worktable, column, and spindle box are made of high rigidity cast iron structure, with reinforcing ribs distributed inside the base. The slide is a box type structure, ensuring the high rigidity and bending and shock absorption performance of the foundation components. The column adopts a column structure, with a stable foundation and good rigidity; The basic components are molded with resin sand and undergo aging treatment to ensure the stability of the long-term accuracy of the machine tool, providing a guarantee for the stability of the machine tool performance.
2. The X, Y, and Z-direction guide rail pairs are made of British made plastic, which has good wear resistance and precision retention. Cooperate with automatic forced lubrication to achieve non crawling motion of the machine tool.
3. High precision and high-strength ball screws are used for feeding in the X, Y, and Z directions, with a high feed speed; The drive motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw without backlash, ensuring the positioning accuracy of the machine tool;
4. Adopting high-speed, high-precision, and high rigidity spindle units, with strong axial and radial bearing capacity, and a speed of up to 8000rpm;
5. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
6. The external protection of the machine tool adopts a fully enclosed structure design, which is safe and reliable;
7. Adopting centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
8. Electrical components are selected from well-known brands. (Siemens or Schneider is selected as the intermediate relay.)
9. Accuracy
The precision shall be manufactured and accepted in accordance with JB/T8771.2-1998 "Inspection Conditions for Machining Centers Part 2: Geometric Accuracy Inspection of Vertical Machining Centers" and JB/T8771.4-1998 "Inspection Conditions for Machining Centers Part 4: Positioning Accuracy and Repetitive Positioning Accuracy Inspection of Linear and Rotary Axes".
Positioning accuracy can reach: ± 0.015 Repeat positioning accuracy can reach: ± 0.01
10. CNC control system (standard configuration)
The system has complete and reliable interlocking, safety protection, and fault diagnosis alarm functions, equipped with RS232 standard communication interface and CF card, and can achieve DNC processing.
Technical parameters of VMC850 vertical machining center:
Main component suppliers
Note: The above are the suppliers of the main parts of the machine tool Our company needs to replace the manufacturer's parts due to technological transformation But the quality of the replaced parts shall not be lower than the original zero
The quality level of the item.
Standard machine function
optional function
1. The main foundation components such as the base, slide, worktable, column, and spindle box are made of high rigidity cast iron structure, with reinforcing ribs distributed inside the base. The slide is a box type structure, ensuring the high rigidity and bending and shock absorption performance of the foundation components. The column adopts a column structure, with a stable foundation and good rigidity; The basic components are molded with resin sand and undergo aging treatment to ensure the stability of the long-term accuracy of the machine tool, providing a guarantee for the stability of the machine tool performance.
2. The X, Y, and Z-direction guide rail pairs are made of British made plastic, which has good wear resistance and precision retention. Cooperate with automatic forced lubrication to achieve non crawling motion of the machine tool.
3. High precision and high-strength ball screws are used for feeding in the X, Y, and Z directions, with a high feed speed; The drive motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw without backlash, ensuring the positioning accuracy of the machine tool;
4. Adopting high-speed, high-precision, and high rigidity spindle units, with strong axial and radial bearing capacity, and a speed of up to 8000rpm;
5. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
6. The external protection of the machine tool adopts a fully enclosed structure design, which is safe and reliable;
7. Adopting centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
8. Electrical components are selected from well-known brands. (Siemens or Schneider is selected as the intermediate relay.)
9. Accuracy
The precision shall be manufactured and accepted in accordance with JB/T8771.2-1998 "Inspection Conditions for Machining Centers Part 2: Geometric Accuracy Inspection of Vertical Machining Centers" and JB/T8771.4-1998 "Inspection Conditions for Machining Centers Part 4: Positioning Accuracy and Repetitive Positioning Accuracy Inspection of Linear and Rotary Axes".
Positioning accuracy can reach: ± 0.015 Repeat positioning accuracy can reach: ± 0.01
10. CNC control system (standard configuration)
The system has complete and reliable interlocking, safety protection, and fault diagnosis alarm functions, equipped with RS232 standard communication interface and CF card, and can achieve DNC processing.
Technical parameters of VMC850 vertical machining center:
| model | VMC850 | ||
| Project | Unit | Numerical value | |
| trip | X-axis | mm | 850 |
| Y-axis | mm | 500 | |
| Z-axis | mm | 550 | |
| Spindle nose table surface | mm | 100-650 | |
| Distance from column guide surface to spindle center | mm | 610 | |
| workbenches | size | mm | 1050*500 |
| T-shaped groove (width x number of grooves x spacing) | mm | 5-18-100 | |
| Large load capacity (evenly distributed) | Kg | 500 | |
| main shaft | Spindle speed | r.p.m | Belt type 8000 (standard) |
| Spindle transmission mode | Belt type (standard) | ||
| conicity | # | BT-40 | |
| move | Three axis rapid movement | m/min | 24*24*20 |
| Cutting feed | mm/min | 1-8,000 | |
| Small input unit | mm | 0.001 | |
| Positioning accuracy mm | mm | JIS±0.005/300mm | |
| Repetitive positioning accuracy mm | mm | JIS±0.003mm | |
|
Disc type knife magazine (ATC) |
Number of cutting tools | grasp | 24 |
| Knife handle specifications | BT-40 | ||
| Knife selection method | Bidirectional arbitrary | ||
| Tool exchange time | sec | T-T：2.8sec | |
| Tool changing device | Automatic tool change | ||
| Weight of large cutting tools | Kg | 8 | |
| electrical machinery | main shaft | KW | 7.5 |
| Z-axis | KW | 3.5 | |
| X/Y axis | KW | 2.2 | |
| X. Y, Z guide rails | Screw form | Ball screw Ø 40/P12/C3 | |
| Sliding block form | XY roller track 45mmx4 slider,. Z ball track 45mmx4 slider | ||
|
Fuel tank capacity |
Cutting fluid water tank | L | 250 |
| lubrication system | L | 1.7 | |
| Numerical Control System | model | Mitsubishi M70B (standard) | |
| other | power capacity | KVA | 25 |
| Weight | KG | 5200 | |
| Air pressure demand | KG | ≧6 | |
| Area requirement (L * W * H) | mm | 2670*2175*2360 |
Main component suppliers
| Serial Number | product name | manufacturer | country of origin |
| 1 | controller | Mitsubishi/FANUC (optional) | Japan |
| 2 | spindle | Mitsubishi/FANUC AC servo motor | Japan |
| 3 | X. Y, Z-axis motors | Mitsubishi/FANUC AC servo motor | Japan |
| 4 | spindle bearing | NSK (P4 level) | Japan |
| 5 | X. Y, Z-axis bearings | NSK (P4 level) | Japan |
| 6 | X. Y, Z ball screw | Shangyin/Yintai (C3 level) | Taiwan |
| 7 | X. Y-axis and Z-axis guide rails | Shangyin/Yintai (P level) | Taiwan |
| 8 | drive belt | Taiwan | |
| 9 | Telescopic cover | Daheng | domestic |
| 10 | main shaft | Jianchun | Taiwan |
| 11 | coupling | Martha | Taiwan |
| 12 | Knife cylinder | AirTAC | Taiwan |
| 13 | Spindle cooling system | Gao Wen/Bo Ying Te | Taiwan |
| 14 | Electrical box heat exchanger | Gao Wen/Bo Ying Te | Taiwan |
| 15 | Cutting cooling motor | Da Jing/Hua Le Shi | Taiwan |
| 16 | Three point combination | mindnan | Taiwan |
| 17 | Central lubrication system | river valley | Taiwan |
| 18 | Disc type knife magazine | Okada (BT-40) | Taiwan |
| 19 | Overload protector | schneider | Germany |
| 20 | Proximity Switch | Omron Corporation | Japan |
Note: The above are the suppliers of the main parts of the machine tool Our company needs to replace the manufacturer's parts due to technological transformation But the quality of the replaced parts shall not be lower than the original zero
The quality level of the item.
Standard machine function
| Serial number | Project |
| 1 | Steel attack teeth |
| 2 | External handheld pulse generator |
| 3 | Tool cooling system |
| 4 | Sealed electrical box and heat exchanger |
| 5 | X. Y, Z-axis full face telescopic cover |
| 6 | LED Working Light |
| 7 | Tri color alarm indicator light |
| 8 | special tools |
| 9 | Adjust the cushion block and bolt |
| 10 | Transformer [380V/50HZ] |
| 11 | Water tank&chip storage tank |
| 12 | Belt type spindle 8000 RPM |
| 13 | Automatic Lubrication System |
| 14 | Three axis feed anti-collision system |
| 15 | Factory Inspection Record Form for Machine Tools |
| 16 | System Chinese Operation Manual and Machine Tool Operation Manual |
optional function
| Serial Number | project |
| 1 | Power stabilizer |
| 2 | Main spindle center water outlet |
| 3 | Direct spindle BT-40 12000RPM |
| 4 | Spindle oil cooler |
| 5 | Fourth axis (indexing plate) |
| 6 | oil water separator |
| 7 | Automatic measurement of cutting tools |
| 8 | Tool breakage detection |
| 9 | Crawler chip conveyor&chip collection vehicle |
| 10 | Base chip flushing device |
| 11 | Automatic power-off system |
The 850 machining center is the main model of Daheng Machine Tool, with multiple models to choose from: two-line one hard 850 machining center, three-axis rail 850 machining center, three-axis hard rail heavy-duty 850 machining center, and three-axis rail heavy-duty 850 machining center. Please consult customer service when purchasing.
Determine whether to use hard rails or track rails, the requirements for the system, and the requirements for the tool magazine;
Do you require water outlet from the spindle center, cutting device, spindle oil cooler, etc!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-