VIP member
Variable frequency vertical vibration table
Product Introduction: The essence of the variable frequency vertical electromagnetic vibration table W-LD-HL is to confirm the reliability of the prod
Product details
Variable frequency vertical vibration table
1、 Purpose: The essence of the variable frequency vertical electromagnetic vibration table W-LD-HL is to confirm the reliability of the product, screen out defective products before leaving the factory, and evaluate their failure analysis in order to become a high-level Highly reliable products
2、 Function: Meets vertical (up and down) (adjustable from 1 to 600Hz) testing below various standards
2.01.sine wave
2.02.Frequency modulation (1~600Hz)
2.03.Sweep frequency (1~600Hz)
2.04. Programmable (1~600Hz)
2.04. Programmable (1~600Hz)
2.05.Frequency doubling (1~600Hz)
2.06.Logarithmic (1~600Hz)
2.07. Acceleration
2.07. Acceleration
2.08.amplitude modulation
2.09.time control
2.10. Simple fixed acceleration
2.10. Simple fixed acceleration
2.11.Simple amplitude determination
3、 Vibration direction: Vertical (up and down)
4、 Vibration mode: Vertical (up and down)
4.01.Each has two independent outputs to choose from
4.02.twoIndividual group individual vibration
5、 Vibration waveform: sine wave - selectable (half wave or full wave)
5、 Vibration waveform: sine wave - selectable (half wave or full wave)
5.01.Vertical (up and down) can be used separately for half wave
5.02. Vertical (up and down) can be done separately for full wave
5.02. Vertical (up and down) can be done separately for full wave
6、 Technical indicators:
6.01.Model: W-LD-HL
6.02.Vibration frequency: 1~600Hz (± 0.1%) can be set arbitrarily
6.03. Test load (kg): 0~100kg/excitation force within the range of 2000kgf
6.04. Vibration table size L * H * Wmm: 500X6X500mm
6.05. There are 24 10mm threaded holes on the tabletop
6.06.fourThere are 4 sides in each centerA 7cm long hook hole
6.07. Platform size L * H * Wcm: 50X15X50cm
6.08. Frequency modulation range 1~600Hz: Frequency modulation frequency/time/amplitude/acceleration can be set arbitrarily
6.09. Sweep frequency range 1~600HZ: Sweep frequency/rate/time/amplitude/acceleration can be set arbitrarily, truly standard back and forth sweep frequency and can be cycled
6.10. Programmable range 1~600HZ: Programmable frequency/time/amplitude/acceleration can be set arbitrarily, with a total of 15 segments
6.11. Frequency doubling range 1~600HZ: Frequency doubling frequency/time/amplitude/acceleration can be set arbitrarily, with a total of 15 segments
6.12. Logarithmic range 1~600HZ: sweep frequency/rate/time/amplitude/acceleration can be set arbitrarily, truly standard back and forth sweep frequency and recyclable
6.13. Simple constant acceleration: Simple frequency sweep within 1~600HZ with frequency variation and constant acceleration
6.14. Simple amplitude setting: Simple frequency sweep within 1~600HZ with frequency variation and constant amplitude
6.15. Precision: Precision: The frequency can be displayed up to 0.01Hz
6.16. Amplitude (adjustable range MMP-P): 0-5mm can be adjusted arbitrarily
6.17. Acceleration g (m/s2): 0~20g (200m/s2) can be adjusted arbitrarily
6.18. Sinusoidal excitation force (thrust): 2000kgf
6.19. Time Control: Any time can be set (in seconds)
6.20. Power supply voltage (V): 220 ± 20%/(50/60Hz)
6.21. Current: 10 (A)
6.22. Vibration machine power: 2.2 (KW)
6.23. Cooling method: natural air cooling
6.24. Temperature and humidity: Temperature -10 ℃~+60℃/Humidity 10%~95%
6.25. Electromagnetic field radiation: within 110 milliGauss (1 meter)
6.26. Measuring instrument (purchased separately): Display amplitude/acceleration (purchased separately)
6.27. There are also two types of standard countertops:
6.03. Test load (kg): 0~100kg/excitation force within the range of 2000kgf
6.04. Vibration table size L * H * Wmm: 500X6X500mm
6.05. There are 24 10mm threaded holes on the tabletop
6.06.fourThere are 4 sides in each centerA 7cm long hook hole
6.07. Platform size L * H * Wcm: 50X15X50cm
6.08. Frequency modulation range 1~600Hz: Frequency modulation frequency/time/amplitude/acceleration can be set arbitrarily
6.09. Sweep frequency range 1~600HZ: Sweep frequency/rate/time/amplitude/acceleration can be set arbitrarily, truly standard back and forth sweep frequency and can be cycled
6.10. Programmable range 1~600HZ: Programmable frequency/time/amplitude/acceleration can be set arbitrarily, with a total of 15 segments
6.11. Frequency doubling range 1~600HZ: Frequency doubling frequency/time/amplitude/acceleration can be set arbitrarily, with a total of 15 segments
6.12. Logarithmic range 1~600HZ: sweep frequency/rate/time/amplitude/acceleration can be set arbitrarily, truly standard back and forth sweep frequency and recyclable
6.13. Simple constant acceleration: Simple frequency sweep within 1~600HZ with frequency variation and constant acceleration
6.14. Simple amplitude setting: Simple frequency sweep within 1~600HZ with frequency variation and constant amplitude
6.15. Precision: Precision: The frequency can be displayed up to 0.01Hz
6.16. Amplitude (adjustable range MMP-P): 0-5mm can be adjusted arbitrarily
6.17. Acceleration g (m/s2): 0~20g (200m/s2) can be adjusted arbitrarily
6.18. Sinusoidal excitation force (thrust): 2000kgf
6.19. Time Control: Any time can be set (in seconds)
6.20. Power supply voltage (V): 220 ± 20%/(50/60Hz)
6.21. Current: 10 (A)
6.22. Vibration machine power: 2.2 (KW)
6.23. Cooling method: natural air cooling
6.24. Temperature and humidity: Temperature -10 ℃~+60℃/Humidity 10%~95%
6.25. Electromagnetic field radiation: within 110 milliGauss (1 meter)
6.26. Measuring instrument (purchased separately): Display amplitude/acceleration (purchased separately)
6.27. There are also two types of standard countertops:
A.35*35CM
B.75*75CM
6.28.Total weight: approximately 68kg
6.28.Total weight: approximately 68kg
6.29.Main calculation formula for vibration table: 1g=9.8m/s2
Acceleration (unit: g)=0.002 * f2 (frequency unit: HZ) * D (amplitude unit: MMP-P)
Note: The pictures are for reference only and are not actually equipped with a table.
This product is a standard model product of our company!Welcome to the website of Dongguan Weihuang Testing Equipment Co., Ltd. This page provides detailed information on the constant temperature and humidity test chamber! To learn more about other devices, please log in: http://www.weihuang0769.com
Dongguan Weihuang is engaged inConstant temperature and humidity experimental chamberCold and hot shock test chamberHigh and low temperature test chamberAfter ten years of experience in product research and development, design, and production, our manufacturing process and technology have surpassed similar imported products, with excellent quality and low prices. We welcome new and old customers to inquire by phone. We can also manufacture non-standard products according to customer requirements. Free home delivery and installation and debugging instructions (until the customer's employees operate independently and are satisfied)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-