Bending stainless steel water tank, combination stainless steel water tank, cylindrical stainless steel water tank

YouliyuanWATER TANK SERIES
1、 Overview
The Youliyuan brand series water tanks produced by our company are made of high-quality boards, which are made into single plates of different specifications (1mX1m, 1mX0.5m, 0.5mX0.5m), and then assembled. The relevant parameters of this product are designed based on the "Code for Design of Building Water Supply and Drainage" (GBJ15-88), and the various hygiene indicators of this series of products have been identified by the Beijing Municipal Health and Epidemic Prevention Department and meet the "Sanitary Standards for Drinking Water" GB5749-85. This series of water tanks has the advantages of flexible on-site assembly, low deformation, strong seismic resistance, corrosion resistance, easy cleaning, and long service life.

2、 Scope of application
Mainly suitable for regulating building water supply, fire water tanks, storage water tanks, expansion and condensation water tanks for heating systems, temporary water tanks for building construction, road construction, geological exploration, and national defense engineering. The water tank can store both cold water and hot water, with acid and alkali resistance, no leakage, deformation, or corrosion.

3、 Product classification
Combination stainless steel water tank
Combination enamel steel plate water tank
Combination SMC water tank
Combination galvanized steel plate water tank

4、 Selection instructions
1. When placing an order, the size of the water tank, the location of the connecting pipe, and the diameter of the pipe should be provided.
2. It is advisable to use a water storage temperature of 4-65 ℃. When the storage water temperature is higher than this value, it can be raised at the time of ordering and resolved separately.
3. The load of the water tank on the ground should be determined by the structural designer.
4. When the water tank connection position provided by the user happens to be at the board joint, our company needs to adjust it, and the pipe diameter remains unchanged (without further notice to the user).

5、 Installation and acceptance
1. During installation, a maintenance passage of no less than 700 millimeters should be left between the box and the wall, and the top and bottom of the box should be no less than 500 meters.
2. During civil construction, the support piers should be prepared first, and the connection joints between the unit plates at the bottom of the water tank should be located on the support piers.
3. Close the outlet and drain pipes, open the water pipe, and check the water level while adding water until it is full. If there is no leakage within 24 hours, it is considered qualified.

6、 Precautions
1. When placing an order, the user should indicate the basic information of the water tank, whether it is a support or a separate design.
2. Design: The designer should specify the volume and basic dimensions of the appearance.
3. When placing an order, the user should specify the diameter, elevation, and dimensions of the inlet and outlet pipes of the water tank according to the design requirements.


7、 Stamped spherical welded stainless steel water tank features:
1. Beautiful and attractive appearance.
2. Good water quality, no secondary pollution.
3. There are tension bars inside the water tank, which solves the pressure problem of a large capacity water tank.
4. Long service life. The plate is formed by one-time stamping (the pressure bearing capacity of the stamped plate is 3-4 times that of a regular flat plate), and all welding is done using argon arc welding.
5. On site assembly, convenient for construction


8、 Characteristics of stainless steel bent water tank:
1. Beautiful appearance.
2. Good water quality.
3. Can be used as a non-standard water tank.
4. On site assembly, convenient construction

9、 Characteristics of enamel steel plate water tank:
1. Good water quality. Enamel glaze uses natural minerals such as quartz, feldspar, and fluorite as raw materials, which are non-toxic, odorless, and naturally pure.
2. The board is made of high-quality carbon steel plate and processed into standard panels.
3. The steel plate is made of high-temperature porcelain, and at a high temperature of 1300 ℃, ions penetrate each other and bond together, never falling off.
4. On site assembly, convenient for construction.


10SMCCharacteristics of water tank:
1. Beautiful appearance.

2. The plate is formed in one go.
3. On site assembly, convenient for construction.