1. The WC low-pressure Venturi dust collector is actually a two-stage dust removal system with an efficiency of up to 99%: 2. The dust removal resistance is 127mmH2O, with low power consumption: 3. The inlet dust concentration can reach 35g/m3, with strong adaptability: 4. The components are standardized and the cost is low: 5. Due to the formation of a water film inside the Venturi tube, wear is small and the service life is long: 6. The inlet hole is tight and easy to open. As long as the inlet hole is opened, all internal components of the equipment can be touched, making it easy to clean: 7. The outlet hole has a large diameter and requires very low water quality for the supply, without blockage; 8. The water pressure for the supply is only 0.1kg/cm2; 9. It has a small footprint, easy installation, reliable operation, and almost no maintenance required, with no vulnerable parts; 10. The outlet gas has no water carrying phenomenon.

1. The WC low-pressure Venturi dust collector should be antifreeze during operation due to the use of water for dust removal; 2. Adjust the valve on the water supply pipe to spray a 2cm high water column from the outlet hole; 3. Adjust the opening degree of the bottom valve of the dust collector to ensure that a small amount of water overflows from the overflow pipe during operation; 4. To save water and be recyclable.

Guangxi WC Low pressure Venturi Dust Collector Lanzhou WC Low pressure Venturi Dust Collector