1、 Product Introduction Product introduction

Industrial thermistors are used as sensors for measuring temperature,Usually used in conjunction with display instruments, recording instruments, and electronic regulators. It can directly measure various production processes from -200 ℃ to 420 ℃The surface temperature of liquids, vapors, gases, and solids within the range.

Industrial thermal resistance as ameasurement of the temperature sensor, Usually, and display instruments,recording instruments and electronic supporting the use of regulator. It can bedirectly measured in various production processes From -200 ℃ ~420 ℃ range ofliquid, steam and gas and solid medium surface temperature.

According to national regulations, our company produces products that comply with IEC standardsPt100 international standard division number、Pt1000Platinum thermistor and Cu50 with professional standard division numberCopper thermistors are divided into two categories: assembled and uniformly designed thermistors.

According to the provisions of the state,Our company in line with the IEC international standard index number Pt100, Pt1000 platinum thermal resistance Andin accordance with the professional standards index number Cu50 thermalresistance two categories two kinds of assembly type, unified design thermalresistance.

2、 Working principle Operational principle

Industrial thermistor,Platinum thermistors and copper thermistors are two major categories.

The thermal resistance of industrial,platinum thermal resistance and thermal resistance of two kinds of.

Thermistor measures temperature by utilizing the characteristic that a substance's own resistance changes with temperature. The heated part of a thermal resistor（Temperature sensing elementIt is a uniform double winding of metal wires on a skeleton made of insulating material. When there is a temperature gradient in the measured medium, the measured temperature is the average temperature in the medium layer within the range of the temperature sensing element.

Thermal resistance is when the temperaturechanges its resistance along with the characteristic changes of temperaturemeasurement using the material. The thermal resistance of the heating part(temperature sensor) is made of metal wire even double wound on the insulatingmaterial on the skeleton. When measured in the medium temperature gradientexists, The average temperature of the measured temperature is the temperatureof the components within the dielectric layer in the.

Prefabricated thermistor mainly consists of a junction box, protective tube, terminal block, insulation sleeve, and temperature sensing element, and is equipped with various installation and fixing devices.

Assembly type thermal resistance is mainlycomposed of a junction box, protection tube, terminals, the insulating casingand the temperature sensing element is the basic structure, And with a varietyof mounting and fixing device.

WZPThe temperature sensing element of a platinum thermistor is a platinum wire winding, and dual platinum resistors are mainly used in situations where two sets of display, recording, or regulating instruments are required to simultaneously detect the temperature at the same location.

The temperature sensing element WZPplatinum thermal resistance is a platinum wire winding, Double platinumresistance is mainly used to detect the same place temperature occasions withtwo sets of display, recording or regulator.

WZCThe temperature sensing element of the copper resistor is a copper wire winding.

Temperature sensing element type WZCcopper resistance is a wire winding.

3、 Technical parametersTechnical parameter

4、 Selection Chart Selection chart

5、 External dimensionsExternal dimensions

6、 Product classificationProduct classification

7、 Wiring instructionsWiring Instructions

8、 Installation diagramInstallation diagram

The above parameters are for reference only and are subject to change without prior notice!

Above parameters arefor reference only and are subject to change without prior notice!