Wall brick freeze-thaw testing machine

Our company has decades of production experience and technology, coupled with the continuous innovation of dozens of development and research personnel, to bring generation after generation of products to the market and win high praise from customers. Based on the principles of "quality *", "service *", and "integrity *", our company has established long-term friendly cooperative relationships with thousands of enterprises.

Wall brick freeze-thaw testing machineIt is designed in full accordance with the slow freezing method in the national standard GB/T50082-2009 "Test Method for Long term Performance and Durability of Ordinary Concrete", the slow freeze-thaw test equipment for concrete in JG/T243-2009 "Concrete Frost Resistance Test Equipment", the test conditions proposed in GB/T2542-2012 "Test Method for Wall Bricks", GB/T4lll-1997 "Test Method for Small Hollow Concrete Blocks", GB/T38l0.12-2007 "Determination of Frost Resistance of Ceramic Bricks", and other related standards.

Technical parameters:

1. Container liner size: 1120mm in length, 500mm in width, and 520mm in height

2. Rated test tile quantity: 5 pieces of 190mm × 190 × 390mm wall tiles or 5 pieces of test pieces with the same mass of about 80Kg

3. Cooling rate: approaching or not exceeding 20 ℃/h

4. Temperature measurement accuracy:- 30—+30℃±0.5℃

5. Equipment dimensions: 2100mm × 1020mm × 1180mm

6. Weight: Approximately 300kg

7. Digital display instrument, touch screen control (customer selection)

8. Freezing time: 0-9999 hours (adjustable)

9. Melting time: 0-9999 hours (adjustable)

10. Freeze thaw cycles: 0-9999 times (adjustable)

Product features:

The compressor, heating part, and power control part are all imported components with high quality and performance;

The temperature difference at each point inside the freeze-thaw box during full load operation shall not exceed 1 ℃;

Automatic control, real-time dynamic display of data curves, automatic storage of test data, and automatic recovery function for unexpected test termination;

Easy installation, small footprint, and low noise.

to configure:

1. Brick caliper
2. Steel ruler
3. Material testing machine
4. Anti bending fixture
5. CLD freeze-thaw testing machine
6. Electric hot blast drying oven
7. Lime explosion cooking box
8. Frost test chamber
9. TH-W carbonization test chamber
10. Preparation of Compressive Strength Test Samples for Wall Bricks - Vibration Equipment - Magnetic Vibration Table
11. Preparation of compressive strength test samples for masonry bricks - Mixing equipment - inorganic speed regulating mixer
12. FMH-256 type wall brick shrinkage expansion meter
13. One time molding test mold for compressive strength of wall bricks
14. Trial mold for secondary molding of wall bricks