Water cooled purification type constant temperature and humidity unit-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

Room 902, Dongbao Building, No. 19 Dongbao Road, Songjiang District, Shanghai

Contact Now

Water cooled purification type constant temperature and humidity unit

1. Product features: The main components used in this product, such as refrigeration compressors, filters, etc., are all original imported branded pro

Contact Supplier

More Products

Product details

1. This machine has temperature regulation, dehumidification, and humidification functions. Heating, cooling, dehumidification, and humidification. There are multiple functions such as ventilation, and users can choose any function according to their needs.

2. When indoor humid air passes through the surface of the evaporator, due to the evaporator temperature being lower than the dew point temperature of the humid air, water vapor in the air condenses and precipitates, accumulates in the water tray, and is discharged through the water pipe, reducing the moisture content of the air. After dehumidification, the humid air is heated by an air-cooled condenser, and its relative humidity decreases, thus achieving the goal of drying the ambient air.

地下人防工程除湿空调.jpg

3. Technical parameters:

performance model				JH250
empty transfer machine group whole machine sexually ability	Refrigeration capacity		kW	250
	Refrigeration capacity		10⁴kcal/h	21.50
	energy regulation		%	100,50,0
	Heating Capacity	electrical heating	kW	110
		electrical heating	10⁴kcal/h	9.46
		Hot water heating	kW	215
		Hot water heating	10⁴kcal/h	18.49
		Steam Heating	kW	270
		Steam Heating	10⁴kcal/h	23.22
	Air volume		m³/h	46000
	external static pressure		Pa	400/1000
	Unit noise		dB(A)	77/84
	Filtration efficiency			High school effectiveness(colorimetry90-95%)
	Temperature control range and accuracy		℃	18~25℃，±0.5~1.0℃
	Humidity control range and accuracy		%RH	RH50~70%， ±5%~10%
	power supply			380V，50Hz, three-phase four wire system
	Total capacity of the unit		kW	237.5-244.5
refrigeration system	compressor		type	Fully enclosed vortex type
			quantity	2
			Nominal input power(kW)	67.1
	refrigerant		type	R22
	refrigerant		Throttle method	Thermal expansion valve
	evaporator		type	Copper tube sleeve aluminum sheet
	condenser		type	Shell and tube type
			amount of watert/h	55
			Inlet and outlet pipe diameterDN	DN100
wind machine system interconnected system	fan		type	Low noise centrifugal type(belt transmission)
			quantity	2
			power(kW)	15.0-18.5
	air filter		type	initial effect+Medium efficiency
add heat implement	electrical heating		type	electrothermal
	electrical heating		power(kW)	110
	Hot water heating		Heating capacity(kW)	215
	Hot water heating		Inlet and outlet pipe diameterDN	40
	Steam Heating		Heating capacity(kW)	270
	Steam Heating		Inlet and outlet pipe diameterDN	40
humidifier			type	Electrode type/electrothermal
			Humidification amount(kg/h)	42
			power(kW)	30.4
			Inlet pipe diameter	1/2”
External dimensions			long(mm)	3940
			wide(mm)	2200
			tall(mm)	2500
weight			kg	2750

Note: The data in square brackets are the parameters of the hood type unit

ZHONGYOUBasic configuration table of water-cooled constant temperature and humidity air conditioning unit

Serial Number	Component Name	Origin/Brand
1	Fully enclosed compressor	Copeland from the United States/Daikin from JapanDAIKIN
2	water-cooled condenser	Nanjing Jindian/Yangzhou 10000
3	Axial flow fan	Zhejiang Dunli/Hangzhou Micro Light
4	reservoir	AmericaEmerson Emerson
5	Finned evaporator	self-made
6	centrifugal fan	Shandong Xinfeng/Zhejiang Yilida
7	expansion valve	Danfoss, Denmark/USAEmerson Emerson
8	filter	AmericaEmerson Emerson
9	solenoid valve	Castel Italy/Danfoss Denmark
10	Pressure controller	Changzhou White Egret/Shanghai Fengshen
11	door plank	Processing and manufacturing of imported equipment
12	Electrical control components	AC contactor	Schneider TE, France
		Circuit breaker	Schneider TE, France
		connecting terminal	Honeywell in the United States and Phoenix in Germany
		controller	Carel/Deep Blue Electronics from Italy

notesThe component configurations listed in the above configuration table are the current standard configurations of our company. Our products will be updated at any time to keep up with the development needs of the times. If there are any configuration changes, please refer to the order contract. Customers can customize according to their specific requirements.

After sales Service Commitment Form

1	Warranty period, scope, and conditions	The units provided by our company will provide warranty for the entire machine and the project from the date of acceptance1Annual service. During the warranty period, if the system cannot operate normally due to engineering and unit quality issues, our company guarantees free repair and replacement.
2	Speed of problem-solving and troubleshooting	Our company has professional technical personnel responsible for after-sales service. After receiving a repair call2Respond within hours,3Arrive at the scene within the day.
3	Other commitments regarding after-sales service	During the warranty period, our company will6Follow up with customers once a month. Beyond the warranty period, our company will charge reasonable repair costs. (Spare parts cost)+Travel expenses) x110%
4	Other preferential conditions	① Provide specialized tools and auxiliary materials required for installation and debugging. ② Our company will provide free technical consultation to users.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content