The AP-6000 is equipped with all universal water quality detection sensors pre installed on the probe, which can detect 10 standard parameters:PH • ORP • Conductivity • TDS • SSG • Electrical resistivity • Salinity • Dissolved oxygen • Depth • Temperature. At the same time, the host also comes with 4 empty Aux sockets, which allow you to customize your probe by adding additional sensors. Each socket can accommodate one ion selective sensor (ISE) or any of our optical sensors, and these 4 empty sockets can also accommodate up to 2 additional ion selective electrodes and 2 optical electrodes for expansion, so this multi parameter device can accommodate up toUp to 14 parameters can be monitored simultaneously.(For specific parameters, please refer to the specification parameters)

Multi parameter sensor appearance specifications

New self-cleaning system

The detachable self-cleaning system of AP-6000 is inserted into the probe body through a socket and a screw ring (as shown in the above figure). There is a small but powerful motor on the small shaft that allows two brushes to rotate and clean all installed sensors.

Cleaning control

The frequency of wiper cleaning can be configured. When used with telemetry systems, the wipers run every 6 hours to reduce battery consumption.

AP-6000 portable bag

The AP-6000 portable bag set is designed for field monitoring and is equipped with a standard AP-6000 water quality multi parameter probe, GPS function handheld device, 3-meter cable, sturdy casing, and accessories. The cable lengths are different and can be optionally selected, with standard lengths of 10, 20, and 30 meters respectively. All cables of 20 meters and above use winding spools to make them easier to operate

GPS handheld device

GPS handheld device is a handheld device that is palm sized, easy to carry, and can display real-time data viewing and data recording. GPS coordinates are recorded every time they are read. The design is very simple, making your work easier.

AP-6000Flowcell

The AP-6000 is equipped with an adapter for the flow unit of the online monitoring system, which must first be installed on the probe under the probe sleeve. A flow rate of 30 liters per ideal hour, with a recommended working pressure of 500MB. The use of a circulation unit effectively eliminates air contact with the pumped sample in the sampling tube, thereby obtaining truly representative measurement values.

Operation software AquaLink

Our AquaLink software can be downloaded for free from our website. Use this software to download recorded data from your handheld device for analysis, reporting, and trajectory map creation.

AquaLink function

• Easily download data through buttons

Customize your data output by clicking and unchecking buttons

Output a text report for all selected data

• Output data in CSV format, which is convenient for you to open in Excel

Application areas:

Widely applicable in various fields, including lakes, groundwater, rivers, wetlands, aquaculture, mining, oceans, and other areas that require long-term water quality monitoring or portable monitoring.

AP-6000 color page. pdf