VIP member
Water transport mold temperature machine
Water transport mold temperature machine
Product details
Product:
Temperature control equipment, high and low dual temperature control water temperature machine, hot and cold mold temperature machine, high-efficiency mold temperature machine, water temperature machine, die-casting water temperature machine, standard water temperature machine, high temperature water temperature machine, water heater
brief introduction:
Maximum operating temperature of 120 ℃, simple microcomputer touch control operation, automatic exhaust, water and return temperature display upon startup, pipeline explosion-proof device, mold return function (optional), OMRON, FUJI, TE control parts, stainless steel pipeline, reducing pipe resistance and rust, fault display, maintenance does not require professional personnel
Security protection and indication system
Power underphase protection, main power supply without fuse circuit breaker, pump reverse protection and indicator light, pump overload protection and indicator light, water shortage protection and indicator light, overheating protection and indicator light, hot water GYW-PASS pressure relief circuit, temperature abnormal alarm and indicator light, abnormal alarm buzzer
Application scope of water transport mold temperature machine:
The water transport mold temperature machine is widely used in various industries such as plastic molding, light guide plate die-casting, rubber tires, rollers, chemical reaction vessels, adhesives, mixing, and food
Main functional features of the water transport mold temperature machine:
1. Eliminate surface weld lines, weld marks, ripples, and silver wire patterns on the product, completely solving the surface shrinkage phenomenon of plastic products.
2. Improve the surface smoothness of the product to achieve a mirror finish, eliminating the need for painting and subsequent processing, and increasing the yield rate by 20% to 30%.
3. Resolve the floating fiber phenomenon caused by adding fibers to products to improve quality.
4. Improving injection flowability through thin-walled molding, enhancing product quality and strength, reducing injection cycle time by over 60% for thick walled molding, and increasing plastic flowability and filling efficiency.
|
parameter/model |
unit |
GYW-6H |
GYW-9H |
GYW-12H |
GYW-18H |
GYW-24H |
GYW-30H |
GYW-36H |
GYW-90H |
|
power supply |
|
AC380V/415V/3PHASE/50HZ |
|||||||
|
Heat transfer media |
|
clean water |
|||||||
|
Temperature range |
|
30linear measure-120linear measure |
|||||||
|
Temp Accuracy |
|
PID+1linear measure |
|||||||
|
Power |
kw |
6 |
9 |
12 |
18 |
24 |
30 |
36 |
90 |
|
MOTOR |
kw |
0.375 |
0.75 |
0.75 |
0.75 |
1.5 |
2.5 |
3.75 |
3.75 |
|
Maximum pressure |
bar |
3 |
4 |
4 |
4 |
5 |
5 |
5 |
5 |
|
maximum flow |
L/min |
50 |
100 |
100 |
100 |
150 |
150 |
380 |
450 |
|
Safety device |
|
phase loss/oil starvation/timeout/overload/reversal/undervoltage |
|||||||
|
cooling method |
|
direct cooling |
|||||||
|
equipment capacity |
L |
10 |
10 |
10 |
10 |
15 |
15 |
15 |
20 |
|
Circulating pipe diameter |
inch |
3/8 |
3/8 |
3/8 |
1 |
1 |
1 |
1.5 |
2 |
|
Cooling water pipe diameter |
inch |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
3/4 |
|
Size: Long |
mm |
690 |
690 |
690 |
800 |
800 |
800 |
800 |
2160 |
|
Size: Width |
mm |
325 |
325 |
325 |
330 |
330 |
330 |
400 |
850 |
|
Size: High |
mm |
660 |
660 |
660 |
780 |
780 |
800 |
920 |
1650 |
|
Mechanical weight |
kg |
70 |
75 |
80 |
90 |
140 |
160 |
220 |
360 |
The above parameters are subject to change without prior notice
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-