VIP member
Water treatment UV sterilizer
The water treatment ultraviolet sterilizer integrates comprehensive sciences such as optics, microbiology, mechanics, chemistry, electronics, and flui
Product details
Water treatment UV sterilizerIntegrating optics, microbiology, mechanics, chemistry, electronics, fluid mechanics, and other comprehensive sciences. The strong UV-C light generated by a specially designed high-efficiency, high-intensity, and long-life UV-C light generating device is used to irradiate flowing water. When bacteria, viruses, etc. in water are irradiated with a certain dose of ultraviolet C light (wavelength 253.7nm), the DNA structure of bacteria and viruses will be destroyed, causing immediate death or inability to reproduce offspring, achieving the purpose of sterilization.
Characteristics of UV sterilizer for water treatment:
1. Choose high-efficiency UV-C (LL or LH) ultraviolet sterilization lamps
The water treatment ultraviolet sterilizer adopts low-pressure and high-strength ultraviolet lamp tube technology, and the service life of the lamp tube is guaranteed to be over 9000 hours.
2. Choose quartz sleeves with high transparency and purity to ensure that ultraviolet rays pass through at least 90%.
3. Choose the world's advanced constant, high-strength UV specific ballasts with UL safety certification to ensure the normal operation of the entire system in complex situations.
4. Select high-quality stainless steel as the reactor (made of 304 stainless steel material), and perform special polishing treatment on the inner wall of the reactor to improve the sterilization effect.
A total length of equipment B distance from drain valve to equipment C distance from flange center D equipment diameter E equipment height F flange height
Maintenance and upkeep of UV sterilizers for water treatment:
1. Regular cleaning of quartz casing
First, turn off the power, remove the dust covers on both sides of the water treatment ultraviolet sterilizer, take out the lamp tube, remove the end caps, take out the "O" ring, and then slowly extract the quartz tube. When cleaning the casing, use alcohol as a cleaning solution. After cleaning, the operator should not directly touch the surface of the quartz tube with their hands to avoid dirtying and affecting transparency. Align the quartz tube with the water seal holes at both ends, insert the quartz tube, and leave enough space at both ends.
To make it equal, insert the "O" - shaped rubber ring and slowly and evenly tighten the pressure cover. The force should not be too strong to avoid causing the quartz tube to break. Then conduct a water test. If there is water leakage, gently tighten the pressure cover until there is no water leakage. Finally, install the lamp tube and it can run. The following is the installation diagram:
Instructions for using water treatment UV sterilizer:
1. The water treatment ultraviolet sterilizer of this device is horizontally installed indoors, with the bracket fixed on a designated foundation or workbench (connected to the inlet and outlet). The sterilization device is located indoors, and in addition to considering the convenience of water supply and drainage and meeting the requirements of the process flow, attention should also be paid to leaving an installation position where the ultraviolet lamp tube and space can be extracted. The electrical control box is installed near the device, with a relative humidity of no more than 80 ℃, no corrosive gases, no conductive dust, and no strong vibration and impact.
2. This product is a pipeline type ultraviolet sterilizer, with two water outlets that can be selected as the inlet and outlet according to the pipeline direction. It can be placed horizontally or vertically according to user needs. To facilitate the replacement of light tubes and quartz tubes, there should be space of the same length on one side as the equipment.
3. After product installation, conduct a water test to ensure no water leakage, and then connect the power supply.
4. After connecting the power supply, the indicator light will turn on to ensure that the lamp head and lamp tube are connected properly. Then, press the "power switch" button on the dust cover and the lamp tube indicator light will turn on. The timer will rotate and wait for 3-5 seconds for the lamp tube to light up. At this time, the equipment will run normally. After confirming that the lamp tube is on for 3-5 minutes, first open the water valve, and then open the water inlet valve. At this time, the machine will start running.
Water treatment UV sterilizerManufacturer introduction:
Youwei Environmental Protection Equipment Technology Co., Ltd. was established in 2013 and is located in Chang'an Industrial Park, Dingzhou City. Its main products include water treatment equipment such as ultraviolet sterilizers and water tank self-cleaning sterilizers. Since its establishment, the company has been trusted by customers with advanced production equipment, comprehensive after-sales service, rich production experience, and high-quality product quality. Our company's existing brand "Youwei Environmental Protection" has formed a brand effect in the minds of a large number of customers, with quality standards that make customers feel at ease. Looking ahead to the future, the company will strive to become an excellent enterprise in China's environmental protection equipment industry with higher quality products and more comprehensive services, and constantly strive to succeed.
Our company has newly added sandblasting technology to make the equipment more beautiful and durable. Due to the large number of product models, specific prices can be consulted by phone!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-