Introduction:

The object material and adhesive are thoroughly mixed into wet software in a cylindrical container, and then cut into uniform wet particles by a high-speed grinding slurry placed on the side.

Principle:

This machine adopts a horizontal cylindrical structure with a reasonable structure. Fully seal the drive shaft and switch to water during cleaning. Fluidized granulation results in approximately spherical particles with good flowability. Reduce adhesive by 25% compared to traditional processes and shorten drying time. Each batch is dry mixed for 2 minutes and pelletized for 1-4 minutes, which increases efficiency by 4-5 times compared to traditional processes. Completed in the same closed environment, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards. The entire operation has strict safety measures.

characteristic:

1. Made of stainless steel, with beautiful appearance, reasonable structure, high granulation rate, and beautiful particles;

2. Small space occupation, easy mobility, simple operation, and convenient cleaning;

3. Automatic discharge of materials for consistent operation;

4. No mechanized action, no maintenance required;

5. Reduce manual labor intensity and improve work efficiency;

6. Completed in the same closed container, dry mixing wet mixing granulation, process reduction, in compliance with GMP standards.

7. Mix evenly, use less adhesive, and have strong kneading ability;

8. Can be widely applied in industries such as food, chemical, metallurgy, powder, etc

9. Adopting a horizontal cylindrical structure, the drive shaft is fully sealed and can be cleaned with water. Fluidized granulation results in approximately spherical particles with good flowability.

10. Reduce adhesive by 25% compared to traditional processes and shorten drying time.

Parameters:

Note:

1. The power can be adjusted according to the specific gravity and properties of the material;

2. The external dimensions can be adjusted according to the height of the site;

3. Larger equipment can be customized according to requirements