Product Description:

What is a shower room?Blowing shower room, also known as air blowing shower room, has been widely used in electronic production, precision instruments, instrumentation, chemical and light industry, pharmaceutical, medical, food and other production and research departments. A shower room is an ideal air purification device used to remove dust from people and objects entering and leaving a clean room.

Principle of shower room:
The shower room adopts a jet air flow form, and the variable speed centrifugal fan presses the air filtered by the pre filter in the negative pressure box into the static pressure box. The clean air flow blown out through the air nozzle passes through the working area at a certain wind speed, carrying away the dust particles and biological particles of people and objects themselves, thus achieving the purpose of cleanliness.

Blow shower room structure:
The outdoor box of this air shower adopts a box type structural form, with static pressure boxes on both sides and the upper part of the box, and air filters inside. The air shower adopts low-noise and smooth running air conditioning fans. By adjusting the operating conditions of the fan unit, the air speed in the working area can always be maintained within the ideal range, effectively extending the main component of the air shower - the high-efficiency air filter, and reducing the operating costs of the air shower.

Classification of shower rooms:
Intelligent voice prompts for shower rooms, fully automatic door shower rooms, 180 degree sliding door shower rooms, 90 degree automatic door shower rooms, explosion-proof shower rooms, and fast rolling shutter door shower rooms.

High quality materials for shower rooms
1. Made of high-quality all stainless steel/cold-rolled steel plate baked paint, high-strength stainless steel wear-resistant bottom plate, and stainless steel nozzle, it has good anti-corrosion and rust resistance;
2. Equipped with transparent windows and LED electronic lighting, the light is uniform and consumes less energy.

Standard technical parameters of "Zijing" shower room:

Working procedures for entering and exiting the "Zijing" shower room:
1. Enter the clean area:
When personnel entering the clean area open the outer door, the electric lock of the inner door automatically locks to prevent the flow of unpurified air into the clean area. The lighting of the air shower room lights up, and the working indicator light outside the door lights up.
After entering the air shower room and closing the outer door, the voice prompt reads: "Hello, please stand in the sensing area". The infrared probe of the system starts to detect whether there is someone. If someone is detected, the system will immediately enter the air shower process.
1.3 Before the air shower, lock the inner and outer doors, start the air shower by starting the fan, and at the same time, start the countdown for the air shower. Voice prompt: "Working, please rotate your body 360 degrees".
If the system does not detect anyone in the air shower room within the specified time after the outer door is closed, it will return to standby mode.
During the 1.5 air shower process, if someone presses the up, down, or lighting switch, the voice will prompt: "Working, please do not touch the switch casually".
During the air shower process, if someone presses the emergency stop switch, the air shower will end. Press the emergency stop button again to cancel the emergency stop status.
After the 1.7 air shower is completed, the inner door is unlocked and the voice prompt reads: "The air shower is finished, please exit through the rear door".
After personnel exit the air shower room and close the inner door, the system returns to its initial state and waits for the next use.
1.9 After the air shower is completed and the inner door is unlocked. The personnel inside did not leave the air shower room within the specified time, and the system defaults that the person may have left and automatically returns to standby mode.
After the lighting is turned on, if it is not triggered again within the specified time, it will automatically turn off.

2. Leaving the clean area:
2.1 Open the inner door, the electric lock of the outer door locks, the air shower room lighting lights up, and the work indicator light is on;
2.2 People enter the air shower room, close the inner door, and the system begins to check if anyone is in the air shower room. If no one is detected within the specified time, the inner and outer doors will be unlocked;
2.3 If someone is detected, the system will lock the inner door when the personnel open the outer door. When the outer door is closed, the system will return to its initial state;
2.4 In case of special circumstances, personnel can choose to return to the clean area. The system will wait for personnel to open the inner door, and the outer door will be electrically locked. When the inner door is closed, the system will return to its initial state;
After the outer door is opened, if no one is detected within the specified time, if the outer door is opened first, the system will enter the clean area process; If the inner door is opened first at this time, the system will enter the process of leaving the clean area
After the lighting is turned on, if it is not triggered again within the set time, it will automatically turn off.

After sales service time requirements for shower rooms:
Whether it is paid after-sales service or free after-sales service, customers provide feedback to our company regarding equipment after-sales issues. After our company provides a solution and the customer confirms the solution:
1. Arrive at the site within 24 hours within the Pearl River Delta and Yangtze River Delta to solve after-sales service problems;
2. In other areas, it is generally within 48 hours to arrive on-site to solve after-sales service problems, while in special remote areas, it is up to 96 hours to arrive on-site to solve after-sales service problems.

Guangzhou Zijing Purification Equipment Co., Ltd. is a high-tech enterprise that integrates the research and development, manufacturing, testing, sales, and design of clean room equipment, as well as the construction of air purification system projects, air purification equipment, and air filters. It covers many fields including electronics, microelectronics, precision instruments, laboratories, optics, electronics, circuit boards, cosmetics, biomedicine, food processing, aerospace, and more. Our company has passed the ISO 9001:2000 and ISO 14001:1996 international quality and environmental management system integration standard certification of the internationally renowned SGS company, and is a member unit of the China Electronics Society and the Clean Technology Branch of the China Electronics Society.

The shower room can be customized according to non-standard requirements. Please feel free to call us for consultation. With just one phone call, we can help you solve all problems, provide quotes, and measure dimensions on-site for free.

Learn more:Dust shower room air shower cabinet