Product Name: Bow shaped hydraulic press, C-type hydraulic press, single column hydraulic press, motor Bearing. Motor press fitting machine, floor standing hydraulic press, automotive parts riveting equipment, hydraulic shaping machine;

Scope of application:
This series of hydraulic presses is widely used for punching, stamping, shaping, riveting, bending, shearing, and stretching various materials, as well as for the pressing and assembly of various small components. It is a multi-purpose press and an upgraded product of the TM103C series. It adopts an advanced mother and child cylinder hydraulic circuit, which is superior to ordinary hydraulic presses in terms of noise, speed, and power consumption. It is a new generation of hydraulic presses with high efficiency, high speed, high output, and high environmental protection;
Product features:
1. This series of hydraulic presses is powered by liquid pressure of 2-20MPA and is connected to an external three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply;
2. This series of equipment uses liquid as the medium to transmit energy, adopts advanced master and slave cylinder hydraulic circuits, has low oil temperature, and the idle stroke speed is above 150MM/s, with a working speed of less than 30 MM/s;
When the device is in standby mode, the noise level during sliding up and down should not exceed 75 decibels;
4. Adopting a sturdy open structure with integral welding, the body can maintain sufficient rigidity while having the most convenient operating space;
5. There are two control modes: manual and semi-automatic. The press fit upper mold can be manually stopped within any travel range, equipped with an emergency rebound button, and an infrared handguard can also be installed;
The pressing stroke of this series of presses is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold;
7. The lifting height of the press fit spindle can be adjusted within any travel range through a timer or position sensor;
9. Customers can adjust the pressure, stroke, holding time, and closing height themselves for easy operation;
10. The hydraulic system is built into the frame, with a clean, lightweight, and stable appearance;
11. It has an automatic counting function and can also be equipped with a force measurement display and an intelligent temperature controller, which can be customized according to customer requirements;
12. The output range of this series of hydraulic machinery is 15tf-100 tf, with various specifications to choose from (1tf=1000kgf=9.8KN)