VIP member
Wireless high and low voltage meter
Product Model: VICTOR 9001 Product Name: Wireless High and Low Voltage Voltage Meter
Product details
| Product model: VICTOR 9001 | |
|
Product Name:Wireless high and low voltage meter |
|
Instruction manual download
VICTOR9001Wireless high and low voltage meterfromcollector、Insulation rod, receiver, grounding wire, grounding pinComposed of various components, it is used for wireless testing of 0-65kV voltage (ground phase voltage) and can also be used for high voltage testing with voltage indication. The voltage measurement adopts a contact type method. After connecting 5 insulation rods and metal hooks, the collector is hung on the line for testing. The bare wire voltage for contact testing cannot exceed 65kV. This instrument is also equipped with a grounding wire and grounding pin. When testing high voltage, the grounding wire and grounding pin can also be connected directly to the ground for voltage testing. The ground voltage tested with the grounding wire connected and the ground voltage tested without the grounding wire suspended should have a mutual error of no more than 2%. This instrument also has a high-voltage electrical testing function. Bare wires exceeding 65kV are tested using non-contact testing. The collector can gradually approach the line and emit a "beep beep beep beep" sound when powered.
The receiver adopts a 3.5-inch true color LCD screen, wirelessly receives test data, with a straight-line distance of about 100 meters, and displays the detection voltage frequency in a clear and intuitive manner. Insulated rods are lightweight, moisture-proof, heat-resistant, impact resistant, highly insulated, and easy to assemble. Widely used in substations, power stations, railway departments, fire departments, industrial and mining enterprises, as well as monitoring stations and electrical maintenance departments for electrical testing and field electric operations.
Technical Specifications
|
Function
|
High and low voltage testing, frequency testing, and electrical verification
|
|
Power supply
|
Collector: DC 3.7V rechargeable lithium battery, can work continuously for about 20 hours when fully charged
Receiver: DC 8.4V rechargeable lithium battery, can work continuously for about 8 hours when fully charged |
|
measurement method
|
Test voltage: Contact test, bare wire contact test below 65kV;
Electrical testing: non-contact electrical testing, non-contact testing of bare wires exceeding 65kV |
|
transmission method
|
433MHz wireless transmission
|
|
transmission distance
|
The straight-line distance is about 100m
|
|
display mode
|
3.5-inch true color LCD display
|
|
Hanging wire diameter
|
70mm (when using a metal probe hook)
|
|
Pressure measurement range
|
Voltage: 0-65kV (50Hz)
|
|
Frequency: 45.0Hz to 55.0Hz
|
|
|
resolution
|
1V（100V～2000V）
|
|
0.01kV（2.00kV～20.00kV）
|
|
|
0.1kV（20.0kV～65.0kV）
|
|
|
0.1Hz
|
|
|
Voltage accuracy
|
± 5% (0.1kV~65.0kV, 23 ℃ -25 ℃, below 70% Rh)
|
|
frequency accuracy
|
±2Hz（0.1kV～65.0kV）
|
|
Insulation rod length
|
Connect the total length of 4.2m (0.9m for 4 sections and 0.6m for 1 section)
|
|
Ground wire length
|
7m
|
|
data storage
|
9999 sets
|
|
sampling rate
|
2 times per second
|
|
Instrument size
|
Collector: length, width, and thickness 275mm × 105mm × 52mm
Receiver: length, width, and thickness 250mm x 100mm x 45mm |
|
line voltage
|
Bare wires below 65kV can be directly contacted for measurement, and the metal hook of the collector can stably hook onto the bare wire; When conducting electrical testing, bare wires exceeding 65KV should not be tested in contact with bare wires exceeding kV, but can be tested with insulated wires of 110kV.
|
|
data retention
|
Press in data measurement modeHOLDPress the key to hold the data, then press againHOLDKey Cancel Keep
|
|
Exit function
|
pressESCPress the key to exit the current function interface and return to the higher-level directory
|
|
Data retrieval
|
After entering the data retrieval mode,arrowKey to browse the stored data
|
|
No signal indication
|
Dynamically display the "----" symbol when the receiver does not receive the transmission signal
|
|
Auto Shutdown
|
After about 15 minutes of startup, the instrument panel automatically shuts down to reduce battery consumption
|
|
battery voltage
|
When the battery voltage is too low, the low battery voltage symbol is displayed to remind charging
|
|
Instrument quality
|
Collector: 230g (including battery)
Receiver: 410g (including battery) Total weight: 3.5kg (including insulation rod, grounding wire, and battery) |
|
Working temperature and humidity
|
-10℃～40℃； Below 70% Rh
|
|
Storage temperature and humidity
|
-10℃～60℃； Below 70% Rh
|
|
radio interference
|
No interference from 433MHz same frequency signals
|
|
Dielectric Strength
|
Insulated pole: AC 110kV/rms (all insulated poles are connected between both ends)
Collector: 2000V/rms (between the two ends of the casing) Receiver: 2000V/rms (front and rear ends of the casing) |
|
Structure
|
Collector anti drip type II
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-