carpentryfurniturefactorydust collector

The dust collector in a furniture factory has a separation efficiency of up to 99.5% for dusty airflow containing mixed crushed materials such as wood blocks and sawdust. It has low resistance, novel structure, small external dimensions, large processing air volume, light weight, and high separation efficiency.
carpentryWorking principle of dust collector in furniture factory:
When the gas containing dust directly enters the interior of the woodworking dust collector equipment through the air inlet, it will first enter the ash hopper, causing the speed of the airflow to slow down. This will result in large particles of dust falling directly into the ash hopper, while small particles of dust will enter the filter chamber again and be attached to the dust removal filter bag in the filter chamber, mainly attached to the fiber layer of the filter bag. Clean air is discharged from the exhaust port.
carpentryFurniture factory dust collectorThe main three devices are: pipeline system, fan system, and filtration system. In these three systems, the structure and functionality of different configurations are different. But the most basic principle is the same, just like wearing a mask. The pipeline connects the woodworking machinery and the filtration system, and the fan works to create negative pressure suction in the pipeline. The most important ones are the configuration of the fan and the performance of the filter bag. The configuration of the fan is calculated based on the arrangement of the number of machines in the production workshop, which requires professional personnel to calculate the configuration so that the air volume of each machine's filter interface is consistent, in order to effectively remove dust. Dust removal filter bags should be selected according to different environments, and the nature of dust generated in different woodworking workshops is different. The airflow containing wood chips is transported by a fan to the guide bin of the bag filter. The airflow velocity decreases under the action of the guide plate, and heavier wood chips fall into the ash bin under the action of gravity. Other lighter and finer dust particles are adsorbed on the outer surface of the filter bag along with the airflow. After being filtered by the bag, the clean gas enters the exhaust chamber and is discharged outside. As the filtration process continues, more and more dust will accumulate on the outer surface of the filter bag, which will increase the operating resistance of the system and reduce its dust removal efficiency. Therefore, this system is equipped with an automatic pulse dust cleaning device, which consists of a pulse controller, pulse valve, steam drum, and jet pipe. According to the characteristics of wood chips, the pulse amplitude and frequency can be set on the pulse controller. After setting the pulse amplitude and frequency, the system will automatically clean the filter bag during operation, greatly increasing the filtering efficiency and extending the service life of the filter bag. Furniture factory woodworking dust collectors have a simple and compact structure, low steel consumption, and higher capture capacity compared to lighter fibrous dust such as sawdust, shavings, asbestos powder, tobacco, etc.
Jienengda Environmental Protection adheres to the principle of providing users with cost-effective products, and adopts the commonly used high-efficiency pulse blowing technology in China to achieve the goal of recovering dust and purifying exhaust gas. In response to the high concentration of wood dust, the company has improved the performance of traditional dust collectors and producedDMCPulse single machine dust collector、cartridge filterCan effectively handle wood dust from furniture factories.