VIP member
XH6350 Horizontal Machining Center
XH6350 Horizontal Machining Center
Product details
1、 Product Introduction and Usage
This machine tool is a horizontal machining center with a moving column type (the machine head moves up and down, and the column moves back, forth, left, and right). The tool magazine adopts a 24 disc type tool magazine and is equipped with a CNC equally divided worktable. It can achieve one-time clamping of various complex parts such as boxes, shells, molds, etc., and complete various processes such as key, drilling, milling, expansion, hinge, tapping, etc.
2、 Main structural features
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2. X, Y (vertical), Z three-axis rails, supported by 4 guide rails on the X-axis;
3. The feeding in the X, Y, and Z directions adopts ball screws with large pitch, high precision, and high strength, with high feeding speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
4. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
5. The spindle box adopts a 2-speed transmission structure, which automatically switches between high and low gears, suitable for low-speed heavy cutting, with a high-end speed of 4000rpm; Low speed 1000pm;
● 6 X. The Y and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
7. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
8. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
9. The machine tool is equipped with a well-known imported CNC control system, which is fully functional, easy to operate, stable in accuracy, and reliable.
2、 Main structural features
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2. X, Y (vertical), Z three-axis rails, supported by 4 guide rails on the X-axis;
3. The feeding in the X, Y, and Z directions adopts ball screws with large pitch, high precision, and high strength, with high feeding speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
4. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
5. The spindle box adopts a 2-speed transmission structure, which automatically switches between high and low gears, suitable for low-speed heavy cutting, with a high-end speed of 4000rpm; Low speed 1000pm;
● 6 X. The Y and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
7. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
8. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
9. The machine tool is equipped with a well-known imported CNC control system, which is fully functional, easy to operate, stable in accuracy, and reliable.
3、 Main technical parameters
1. Technical parameters
6、 List of main purchased parts
1. Technical parameters
| project | XH6350 Horizontal Machining Center | |
| trip | Workbench movement direction X-axis | 650mm |
| Main spindle slide movement direction Y-axis | 650mm | |
| Z-axis | 670mm | |
| Distance from the spindle end face to the center of the worktable | 240-910mm | |
| Distance from spindle center to worktable | 0-650mm | |
| Rotary worktable | Workbench area (width * length) | 500 × 500mm hydraulic locking |
| Maximum load of workbench | 500Kg | |
| T-shaped groove (groove x width x center distance) | 6×14×80 | |
| Indexing accuracy | ±3' | |
| repeatability | ±1' | |
| Spindle | Main motor power | 11/15kw (servo motor) |
| Spindle inner cone | BT50 | |
| Maximum spindle speed | 6000rpm | |
| magazine | Tool capacity | 24 pieces |
| Maximum tool diameter (adjacent/empty) | ф127/ф178mm | |
| Maximum tool length | 300mm | |
| Maximum tool weight | 15kg | |
| Rapid displacement | X/Y/Z cars move quickly | 15/10/10m/min |
| feed rate | 1～5000mm/min | |
| other | Machine tool dimensions (length x width x height) | 3200×3200×2700mm |
| Net weight of machine tool | 9500Kg | |
accuracy
Accuracy according to GBT 18400.1-2010 Inspection Conditions for Machining Centers Part 1: Geometric Accuracy Inspection of Horizontal and Machine Tools with Additional Spindle Heads (Horizontal Z-axis), GBT 18400.4-2010 Inspection Conditions for Machining Centers Part 4: Positioning Accuracy and Repetitive Positioning Accuracy Inspection of Linear and Rotary Axes.
1. CNC control system
The Fanuc 0i MD system has complete and reliable interlocking, safety protection, and fault diagnosis alarm functions, equipped with RS232 standard communication interface, and can achieve DNC processing.
2. Power supply device
4. Gas source
4、 Configuration
1．Standard configuration
2. Chooseconfiguration
5、 Random attachments for machine tools
Accuracy according to GBT 18400.1-2010 Inspection Conditions for Machining Centers Part 1: Geometric Accuracy Inspection of Horizontal and Machine Tools with Additional Spindle Heads (Horizontal Z-axis), GBT 18400.4-2010 Inspection Conditions for Machining Centers Part 4: Positioning Accuracy and Repetitive Positioning Accuracy Inspection of Linear and Rotary Axes.
1. CNC control system
The Fanuc 0i MD system has complete and reliable interlocking, safety protection, and fault diagnosis alarm functions, equipped with RS232 standard communication interface, and can achieve DNC processing.
| Spindle AC servo motor | 11/15Kw |
| X/Y/Z axis β 22 AC servo motor | 2.5Kw，20 N.m； |
| B-axis β 12 AC servo motor | 1.8Kw，11 N.m |
| Power supply form | Three phase AC 380V ± 10% 50Hz |
| Electricity consumption capacity | 30KVA |
3. Cooling system
| Water tank capacity | 200L |
| Cooling pump power | 450W |
| Cooling pump flow rate | 2.5m3/h |
| useAir pressure: | ≥0.6MPa |
1．Standard configuration
| project | name |
| 1 | FANUC Oi MD CNC System |
| 2 | FANUC spindle AC servo motor β 12 11/15Kw 52.5N M |
| 3 | X/Y/Z-axis servo motor β 22 2.5/2.5/2.5 kW 20N M |
| 4 | 24 disc-shaped knife magazines |
| 5 | The BT50 (6000RPM) precision spindle unit has an actual speed of 60-2400RPM, which is conducive to low-speed heavy cutting |
| 6 | Y (vertical) two roller linear guides, Z-axis four roller linear guides fully supported; X-axis ultra heavy load roller linear guide |
| 7 | Three axis precision screw pair |
| 8 | Three axis guide rail protection system |
| 9 | Intermittent automatic lubrication system |
| 10 | Coolant system |
| 11 | hydraulic system |
| 12 | Pneumatic system |
| 13 | Spindle box automatic balancing system |
| 14 | Manual chip removal system |
| 15 | Clever Work lights, warning lights |
| 16 | Semi protective rice gold system |
2. Chooseconfiguration
| project | name |
| 1 | Automatic chip conveyor |
| 2 | Electric cabinet air conditioner |
| 3 | CNC arbitrary angle indexing worktable (not suitable for heavy cutting) |
5、 Random attachments for machine tools
| Serial Number | name | Specifications or markings | quantity | notes |
| 1 | Spring clip handle | BT50-QH2-90 | 1 | |
| 2 | snap ring | 6， 8，10，12， 16，20 | Each 1 | |
| 3 | Pull the nail | 50BT 1-MAS403 | 1 | |
| 4 | One slot screw screwdriver | GB1432 Ym-I-100 × 7 | 1 | |
| 5 |
Cross groove screw screwdriver |
GB 143 3 Sm-I-100 ×5 | 1 | |
| 6 | Hexagonal interior handle | 3，4，5，6，8， ten | Each 1 |
6、 List of main purchased parts
| Serial Number | name | Model or drawing number | origin | quantity | notes |
| 1 | spindle unit | BT50 | Taiwan | 1 set | |
| 2 | Knife cylinder | H-1000 | Taiwan | 1 set | |
| 3 | Disc type knife magazine | BT50#-24T | Taiwan | 1 set | |
| 4 | X-direction ball screw pair | R40-1OB2-FDWC-1141-1400-C3 | Yintai, Shangyin | 1 set | |
| 5 | Y-direction ball screw pair | R40-1OB2-FDWC-1350-1586-C3 | Yintai, Shangyin | 1 set | |
| 6 | Z-direction ball screw pair | R40-1OB2-FDWC-1281-1758-C3 | Yintai, Shangyin | 1 set | |
| 7 | Precision Nut | YSF M30X1.5 | Taiwan | 3 sets | |
| 8 | Precision Nut | YSR M30X1.5 | Taiwan | 3 sets | |
| 9 | Screw bearings | 30TAC62BDDGC l OPN7A | NSK | 15 sets | |
| 10 | coupling | SFC-080DA-25-35 | Sanmi from Japan/R+W from Germany | 3 sets | |
| 11 | Cooling pump | TPH2T-3K | Taiwan Hualeshi | 1 set | |
| 12 | Automatic Lubrication System | Foshan | 1 set | ||
| 13 | Pneumatic system | AIRTAC | 1 set | ||
| 14 | rotary table | TK56630B round the world |
Yantai | 1 set | |
| 15 | hydraulic system | Domestic production | 1 set |
7、 After sales service
| 1 | Under normal mechanical use, the warranty period is one year. If any problems occur within one year, free on-site repair and free replacement of any parts will be provided |
| 2 | If any parts are damaged during the warranty period, we guarantee that personnel will be in place within 24 hours |
| 3 |
Upon expiration of the warranty period, we will respond within 8 hours upon receiving notification from the buyer and arrive at the site for repair within 48 hours. Only the cost of the parts will be charged, and no service fee will be charged |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-