VIP member
XMT intelligent temperature controller
XMT Intelligent Temperature Controller, Intelligent Temperature Controller, Xiyi Measurement and Control Technology Co., Ltd. 029-88639987
Product details
XMT intelligent temperature controller
1. Input specifications and range: Thermocouple: K (-50~1300 ℃), S (-50~+1700 ℃), T (-200~+350 ℃), E (0~800 ℃), J (0~1000 ℃), B (0~1800 ℃), N (0~1300 ℃), WRe (0~2300 ℃), Thermistor: CU50 (-50~150 ℃), PT100 (-20~600 ℃) Linear voltage: 0~5V, 1~5V, 0~1V, 0~100mV, 0~20mV Linear current (requires external shunt resistor): 0~10mA, 0~20mA, 4~20mA
2. Measurement accuracy: The thermocouple input for thermal resistance, linear voltage, and linear current should use copper resistance to compensate for the cold end or freezing point to compensate for the cold end at a level of 0.5+1; The instrument can measure the division marks of B, S, and WRE within the range of 0-600 ℃, but the measurement accuracy cannot reach level 0.5;
3. Resolution: 1. 0.1
4. Response time: ≤ 0.5 seconds
5. Adjustment methods: Two position control method (adjustable hysteresis), conventional PID control method (parameter self-tuning function), artificial intelligence control method (advanced control algorithm including fuzzy logic PID adjustment and parameter self-tuning function)
6. Output specifications: Relay contact switch output (normally open+normally closed): 250VAC/7A or 30VDC/10A; SSR voltage output: 12VDC/30mA (used to drive SSR solid-state relays); Controllable silicon trigger output: can trigger a bidirectional thyristor with a current of 5-500A; Two unidirectional thyristors are connected in reverse parallel; Linear current output: The starting and ending current values can be freely defined between 0-24mA (voltage range 11-23VDC);
7. Communication supports RS485 communication mode, adopts AIBUS communication protocol, and supports the following baud rate options: 1200bps, 4800bps, 7200bps, 9600bps
8. Alarm output supports two passive contact outputs, with a contact capacity of 250VAC/7A; Supports four alarm output modes: upper limit alarm, lower limit alarm, positive deviation alarm, negative deviation alarm, etc. (up to 2 channels can be output);
9. Manual function: automatic/manual bidirectional undisturbed switching
10. External dimensions and openings (mm) 96 × 96 × 110 openings 92 × 92
11. Power supply 85V-242VAC, 50-60HZ; Power consumption ≤ 4W
12. Working conditions: Environment temperature: 0-50 ℃, relative humidity not exceeding 85%, non corrosive gas, and places without strong electromagnetic interference
13. Product certification has passed CE European Community Safety Certification and ROHS Environmental Protection Certification
1. Input specifications and range: Thermocouple: K (-50~1300 ℃), S (-50~+1700 ℃), T (-200~+350 ℃), E (0~800 ℃), J (0~1000 ℃), B (0~1800 ℃), N (0~1300 ℃), WRe (0~2300 ℃), Thermistor: CU50 (-50~150 ℃), PT100 (-20~600 ℃) Linear voltage: 0~5V, 1~5V, 0~1V, 0~100mV, 0~20mV Linear current (requires external shunt resistor): 0~10mA, 0~20mA, 4~20mA
2. Measurement accuracy: The thermocouple input for thermal resistance, linear voltage, and linear current should use copper resistance to compensate for the cold end or freezing point to compensate for the cold end at a level of 0.5+1; The instrument can measure the division marks of B, S, and WRE within the range of 0-600 ℃, but the measurement accuracy cannot reach level 0.5;
3. Resolution: 1. 0.1
4. Response time: ≤ 0.5 seconds
5. Adjustment methods: Two position control method (adjustable hysteresis), conventional PID control method (parameter self-tuning function), artificial intelligence control method (advanced control algorithm including fuzzy logic PID adjustment and parameter self-tuning function)
6. Output specifications: Relay contact switch output (normally open+normally closed): 250VAC/7A or 30VDC/10A; SSR voltage output: 12VDC/30mA (used to drive SSR solid-state relays); Controllable silicon trigger output: can trigger a bidirectional thyristor with a current of 5-500A; Two unidirectional thyristors are connected in reverse parallel; Linear current output: The starting and ending current values can be freely defined between 0-24mA (voltage range 11-23VDC);
7. Communication supports RS485 communication mode, adopts AIBUS communication protocol, and supports the following baud rate options: 1200bps, 4800bps, 7200bps, 9600bps
8. Alarm output supports two passive contact outputs, with a contact capacity of 250VAC/7A; Supports four alarm output modes: upper limit alarm, lower limit alarm, positive deviation alarm, negative deviation alarm, etc. (up to 2 channels can be output);
9. Manual function: automatic/manual bidirectional undisturbed switching
10. External dimensions and openings (mm) 96 × 96 × 110 openings 92 × 92
11. Power supply 85V-242VAC, 50-60HZ; Power consumption ≤ 4W
12. Working conditions: Environment temperature: 0-50 ℃, relative humidity not exceeding 85%, non corrosive gas, and places without strong electromagnetic interference
13. Product certification has passed CE European Community Safety Certification and ROHS Environmental Protection Certification
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-