VIP member
Xenon lamp weathering test chamber
Xenon lamp weathering test chamber
Product details
Xenon lamp aging test is a xenon arc lamp comprehensive climate test device that simulates the full sunlight spectrum. In addition to conducting climate aging tests, it can also test the resistance of high scoring materialsOptical testing,
Evaluate the light resistance of polymer materials by exposing them to artificial light sources that simulate the spectrum of sunlight passing through glass. From light energy, temperature, rainfall, orCondensation and humidity are the main factors
Simulating and enhancing climate factors through experiments, using xenon arc lamps that can simulate the full spectrum of sunlight to reproduce the damage that exists in different environmentsSexual light waves. Xenon lamp weather resistance test chamber can
Provide corresponding environmental simulation and accelerated testing for scientific research, product development, and quality control, which can be used for the selection of new materialsImprove existing materials or evaluate durability after changes in material composition
Sexual changes and other experiments.
Suitable for plastics, rubber, paint, coatings, inks, paper, textiles, automotive parts, packaging materials, building materials, electronic and electrical products, etc.
Meet the standards:
GB12831-86Rubber vulcanized artificial climate (xenon lamp) aging test method
GB/T1644.2-1999Plastic laboratory light source exposure test method (Part 2: Arc xenon lamp)
GB/T8430-98Textile color fastness test, xenon arc color fastness to artificial light
GB/T5137.3-96Test methods for radiation resistance, high temperature, humidity, combustion resistance, and simulated climate resistance of automotive safety glass
GB/T2423.24-95Environmental testing for electronic and electrical products - Part 2: Test methods, testsSQSimulate solar radiation on the ground.
characteristic:
1.The inner liner is made of high-grade stainless steel plate,A3Steel plate color powder coating.
2.Dynamically rotating sample holder with adjustable rotational speed.
3.Touch screen programmable controller.
4.Equipped with a filter observation window and a harmful gas exhaust outlet.
5.Bimetallic blackboard thermometer.
6.Multiple safety protection devices.
|
model |
LK -XD900 |
|
|
Studio size |
900㎜×900㎜×850Mm (deep)×wide×High) |
|
|
External dimensions |
about1480㎜×1400㎜×2200Mm (deep)×wide×High) |
|
|
Test indicators |
Xenon lamp power |
6KW，4.5KW(Water cooled long arc xenon lamp) optional |
|
Lamp lifespan |
1000～1500Hour by hour |
|
|
Xenon lamp wavelength |
280-800nm |
|
|
Xenon lamp radiation intensity |
550W/m2～1125W/m2(Adjustable to meet different standard requirements) |
|
|
Trigger power |
4.5KWWorking voltage DC220Velectric current27±3A. |
|
|
Temperature range |
(Room temperature)+100C）～65℃±3℃Test blackboard temperature:65℃±3℃ |
|
|
Temperature fluctuation |
±0.5℃ |
|
|
Temperature uniformity |
≤3℃ |
|
|
Temperature deviation |
≤±2℃ |
|
|
Humidity range |
50%R.H±5%R.H |
|
|
Rotation speed of the sample rotating disk |
5～7r/min |
|
|
Distance from arc center to sample |
275～400mmEffective exposure area6500cm2 |
|
|
Spray cycle |
0～9999minAdjustable (e.g. spray)18min,stop102min） |
|
|
Spray pressure |
78～127kpa |
|
|
Lamp tube |
1Long arc xenon lamp |
|
|
Note: The above indicators were measured under normal pressure and no-load conditions |
||
|
junction
structure
With
material
Quality |
Introduction to Box Structure Form |
From the test chamber, heating/humidification/illumination/get wet in the rain/Condensation system/Rotating device/Composition of cooling system and electrical control cabinet |
|
Shell material |
High quality steel plate double-sided spray powder color is computer white |
|
|
Inner box material |
SUS304Stainless steel plate, corrosion-resistant, easy to clean, beautiful and elegant |
|
|
The door |
Left single door with filter window, the door edge is tightly sealed with silicone rubber |
|
|
Sample rack |
Made of stainless steel material, with adjustable sample fixing position, standard stamping forming template or standard rule sample,The sample rack rotates around the center of the lamp tube |
|
|
Control device |
Programmable controller,Touch screen human-machine interface |
|
|
Humidification test |
Steam humidifier controls humidification |
|
|
Rotary table |
The long axis dedicated motor drives the turntable to rotate |
|
|
Blackboard thermometer |
BPTOr black standard thermometerBST. |
|
|
Optical filter |
Borosilicate glass inner and outer filter covers: make the spectral cut-off value of irradiance on the sample similar to the value of ground sunlight; |
|
|
Cooling system |
Compressor refrigeration |
|
|
Irradiation meter |
Using fiber optic transmission to measure the radiation intensity of xenon lamps to avoid measurement errors caused by temperature |
|
|
Power Supply |
AC 1ψ220V; 3ψ220/380V 60/50Hz |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-