VIP member
YD-300P Professional Powder Metallurgy Density Tester
Suitable for the powder metallurgy industry, gear parts with irregular shapes, raw and cooked embryos, and non-standard parts can be quickly measured.
Product details
Applicable toIn the powder metallurgy industry, gear parts with irregular shapes, raw and cooked embryos, and non-standard parts can be quickly measured
The following two powder metallurgy density scales belong to fast measurement powder metallurgy parts density scales that only take a few seconds
To measure product density and weight, it is recommended to weigh 5 grams or more. If it is relatively light, please purchase high-precision product DX-120P
This product can also measure the oil content in powder metallurgy
Principle:According to ASTM B311 and B328; MPIF Standard 42、57； JIS Z2505、 Z2506； GB/T5163 is applicable to wax sealing methodMeasurement by vacuum saturation method,
Using Archimedes' principle buoyancy method, accurately read the measured values directly.
-
Model: YD-300P YD-600P Weighing range: 0.005g~ 300g 0.005g~ 600g Specific gravity accuracy: 0.001 g/cm3 0.001 g/cm3 Measurement time: About 10 seconds About 10 seconds Measurement function: Visual density, volumetric density, oil content Visual density volume -
The video is being updated ........
-
1. No manual calculation required, fully automated data measurement. Easy to operate;
2. Support one click automatic reset and deduction of auxiliary accessory weight operation;
3. One device can complete 7 types of data measurements
4. Adopting gold-plated ceramic sensors, it has the characteristics of long corrosion resistance, long service life, and low failure rate
5. Adopting an integrated transparent measuring sink, the size of the integrated sink is (165 * 115 * 856) mm
6. Adopting a lightweight, thin strip, stainless steel suspension rail design can greatly reduce errors caused by the buoyancy of the suspension rail line;
7. Equipment appearance dimensions; (27 * 27 * 27) mm net weight; 4.5kg
8. Equipped with RS-232 standard interface, this specific gravity meter can be easily connected to computers and printers
① Host, ② sink, ③ measuring table, ④ tweezers, ⑤ instruction manual, ⑥ weights, ⑦ windproof and dustproof cover, ⑧ one set of particle measuring accessories, ⑨ one set of float measuring accessories, ⑩ one power transformer
Oil content volumetric density measurement steps:
① Place the oil-free product into the measuring table, measure the weight in the air, and press the M key to memorize.
② Take the product to the vacuum machine with oil content, measure the weight of the oil containing parts in the air, and press the M key to memorize.
③ Place the oil containing sample into the medium, press the M key to memorize, and directly display the oil content and bulk density values.
Steps for measuring embryo density:
① Place the sample on the measuring table, measure the weight in the air, and press the M key to memorize.
② Immerse the sample completely into the medium, measure the weight in the medium, press the M key to memorize, and directly display the density value. -
Powder metallurgy bulk density testeroperating steps:
① Place the sample to be tested indensimeterOn the measuring table, after stabilizing, press the "Memory" button to memorize the empty weight (weight in the air).
② After oil treatment, place the sample on the measuring table and press the "Memory" button to memorize the empty weight after stabilization.
③ Place the sample in water, stabilize it, and press the "Memory" button to remember the weight of the water (the weight of the sample in water), which will directly display the density of the sample. Press the "F" key to switch values, and display density, porosity, wet density, and volume in sequence.
-
- One year free warranty, lifetime maintenance;
- 7-day no reason return and exchange, 24-hour instant response;
- One on one technical guidance, allowing you to have no worries after purchasing;
- National free consultation hotline: 18659285958.
-
| Download Materials | Update Date |
 YD-300P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
| Instruction manual download | Update Date |
|
YD-300P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
| Color page download | Update Date |
|
YD-300P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
-
-
Option 1: Customer ------->Business Manager ------->Contract Signing ------->Payment on Delivery ------->Corporate Transfer ------->Warehouse Shipment ------->Confirm Receipt ------->Our Company Invoices
Option 2: Customer ------->Business Manager ------->Contract Signing ------->Cash on Delivery ------->Warehouse Shipment ------->Express Collection ------->Confirm Receipt ------->Our Company Invoices
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-