1).Internal material: SUS304#Stainless steel plate thickness1.2mm

2).External material:SPCCSteel plate thickness1.2mmPowder baking paint treatment

3).Layer board/Layer frame:1slice/1The layer is made of stainless steel mesh and can be disassembled

4).Inner box size:500mm(wide)x1000mm(high)x600mm(deep)

5).Outer box size: 850mm(wide)x1535mm(high)x800mm(deep)(Excluding the protruding part of the fan, subject to the actual product)

6).sealing material:Japanese made original imported high tensionparkingTemperature resistance-90~280℃..

7).Insulation material: 80KRock wool, insulation thickness100mm

8).Power lead: will60AElectric current is introduced into the interior of the oven.

9). Aging power supply: input voltage220VOutput voltage50VOutput current60AAdjustable

10）Equipment electrical performance indicators:380V AC 7.5KW

1).Display accuracy:±0.1℃

2).Temperature uniformity:3~4.0℃ (measured under no-load conditions with nitrogen off)

3).temperature range:room temperature+20~200℃ (Note: All non removable components inside the box can withstand high temperatures)200℃）

4).Heating time: RT+20℃~200℃≤45min (Note: Under no-load conditions, the nitrogen opening and heating process can be carried out simultaneously without affecting the heating time)

5).Single aging time:96-2000Hour;

6).Oxygen content:≤1%VOL (Note: The customer provides a nitrogen gas source). Configure a precision oxygen content analyzer to monitor oxygen content in real-time online, monitor and read oxygen content through a touch screen, and replenish nitrogen gas in a timely manner.

3. Control System - Temperature Controller, Color Touch Screen Controller

1) PID microcomputer automatically calculates PV/SV and displays them simultaneously, with touch screen settings;

2) Temperature sensing power CA (K) TYPE

3) The current controller is an SSR contactless relay

4. Heating system

1) Heating for hot air circulation

2) The heating material is stainless steel heating tube

5. Safety devices

1) During the over temperature protection, it is necessary to protect the independent over temperature protection.

6. Supply air circulation system

1) Forced air circulation;

2) The motor is a long axis temperature resistant special type;

3) The fan is a multi blade turbine type;

7. Nitrogen display

1) Install a nitrogen interface with a diameter of 10mm and a quick interface

2) Flow meter 10-100L/min * 2

1) The aging board high-temperature connector (provided by Party A) needs to be installed inside the inner box, and the reserved hole size for the connector cable should be determined.

2) According to the provided PCB aging board, a fixed slot for the inner box needs to be made, and a total of 6 PCB aging boards (aging board size to be determined) need to be fixed in the inner box.

3) Reserve a position for installing a 19 inch monitor.