Automatic folding and sealing machine (left and right drive mode), suitable for sealing heavier cardboard boxes.
Used for post packaging of products. After sealing the required products up and down, enter the packaging state.
Main technical parameters:
1: Voltage/power; 220v/50hz
2: Dimensions: 1770 * 850 * 1520 (in millimeters)
3: Maximum sealing size: length 600/width 500, height 500 (unit: mm)
4: Minimum box size: width 130, height 200 (in millimeters).
5: The total weight of the machine is 150 kilograms.
Main configuration: Taiwan Taibang reducer motor, Omron contact switch and intermediate relay, Tianyi switch and indicator light, Chint AC contactor, Taiwan Xingong cylinder and solenoid valve, Japan NSK bearings, Japan SKD11 blades, Italy imported belt, and Yideli casters
Performance and structural characteristics:
This device mainly consists of a body, an electric system, and a transmission system. The working process of the whole machine is controlled by the power switch. Ready to use upon startup.
1: Body: Spray painted folded panels. Compact structure and reasonable design. Exquisite and durable.
2: Electric system: motor combination. The left and right belt drives ensure smooth operation of the cardboard box.
3: Basic operation: Insert the power supply (220V) - turn on the switch to start operation.

Operation: Turn on the switch, manually adjust according to the width and height of the cardboard box, the motor works, the belt drives, and after the cardboard box is covered, it enters the sealing machine. Start sealing the box.
Transmission system:
1: Composed of multiple rollers combined. Exquisite and durable. The upper two sides of the cardboard box are equipped with plastic round wheels to ensure smooth sealing.

Packing machine:
Main technical parameters
1: Voltage/Power: 380V/50Hz
2: Dimensions: 1400 * 640 * 1470 (in millimeters)
3: Maximum packaging size: Width 780 * Height 580 (unit: mm)
4: Minimum packaging size: 130 * 90 (unit: mm)
5: Whole machine weight: 120 kilograms
to configure: The PLC adopts "Siemens", the small relay adopts "Schneider" products, the proximity switch and photoelectric switch use German "P+F" or "FOTEK", the contactor and control switch use "TE", the roller motor adopts Taiwan City State, and the feeding and returning belt motor adopts "MEIWA", etc;
Performance and structural characteristics:
This device mainly consists of a body/circuit system/tape system/heat sealing system. The whole machine is controlled by PLC. The entire action is precise and orderly.
Body: composed of steel structure and folded plate components, equipped with a belt guide frame on the upper part of the body.
Circuit system: mainly composed of motors/sensors/transformers, etc. Objects are mainly fed/induction packed by motors during packaging.
Thermal sealing system: mainly converts electrical energy into thermal energy, and after voltage transformation, the hot stamping head is responsible for bonding, and the cutting knife is responsible for cutting the tape.
In short: Connect the 220V power supply - the sealing machine starts working by turning on the switch. After the object is sealed, the photoelectric switch is responsible for completing the packaging action, which is compact and flexible.