ZDLP electric single seat regulating valve (WCB)-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18968791139
Address

Shanghai Office: Chonggu Town, Qingpu District, Shanghai.

Contact Now

ZDLP electric single seat regulating valve (WCB)

Contact Supplier

More Products

Product details

Product Overview

The ZDLP electronic electric single seat regulating valve consists of a straight stroke electric actuator and a low flow resistance straight through single seat valve. The electric actuator is an electronic integrated structure with a servo amplifier inside. By inputting control signals and power supply, the valve opening can be controlled to adjust working parameters such as pressure, flow rate, liquid level, and temperature. It has the characteristics of sensitive action, simple connection, large flow rate, small volume, and high adjustment accuracy. The control accuracy and performance are significantly improved compared to the DKZ type.
Single seat valves are suitable for situations with strict requirements for leakage, low pressure difference before and after the valve, and a certain viscosity. Widely used in industries such as power, metallurgy, chemical, petroleum, environmental protection, light industry, equipment, etc.

Main technical parameters and performance indicators

Main technical parameters of the regulating mechanism

Nominal diameter mm		G3/4”						20				25	32	40	50	65	80	100	125	150	200	250	300
Valve seat diameter mm		3	4	5	6	7	8	10	12	15	20	26	32	40	50	66	80	100	125	150	200	250	300
Rated flow coefficient kv	Linear type	0.08	0.12	0.20	0.32	0.5	0.8	1.8	2.8	4.4	6.9	11	17.6	27.5	44	69	110	176	275	440	690	1000	1600
	Equal percentage							1.6	2.5	4	6.3	10	16	25	40	63	100	160	250	400	630	900	1440
Nominal pressure (MPa)		0.6,1.6，2.5，4.0，6.4
Travel distance (mm)		10										16		25		40			60			100
Traffic characteristics		straight line						Straight line, equal percentage, quick open
Working temperature ℃		-40-230 ℃ (normal temperature type), heat sink 230-450 ℃ (medium temperature type), special order -100-600 ℃
Flange size		Compliant with JB78-59 and JB79-59 standards, can be ordered and produced according to JB/79.1-94, JB/79.2-94, ANSI, JIS, DIN and other standards
body material		WCB(ZG230-450)、ZG1Cr18Ni9Ti、ZG0Cr18Ni12Mo2Ti CF8 CF8M
Valve core material		1Cr18Ni9， SS304，0Cr18Ni12Mo2Ti，SS316，ZG1Cr18Ni9Ti
Valve type		Straight through single seat cast ball valve
Upper valve cover type		Ordinary (room temperature), hot plate (medium temperature), long neck (low temperature)
Equipped with electric actuator model	PSL	PSL-201										PSL-202		PSL-204		PSL-208			PSL-312			PSL325
	361L	361LSA-08 361LXA-08										361LSA-20		361LSB-30		361LSB- 50			361LSC-65			361LSC-99
	Explosion proof type	361LXA-20												361LXB-30		361LXB- 50

Note: 1. We can provide users with products that meet national flange standards such as ANSI, JPI, and JPI, with flange spacing determined according to user needs.
2. Products with working temperature, nominal pressure, and nominal diameter exceeding the listed range can be resolved through negotiation with our company

performance

1. Main technical parameters of the executing agency

model		Rated output force N		Speed mm/s		technical parameter
PSL	361L	PSL	361L	PSL	361L	PSL	361L
201	361LSA-08 361LXA-08	1000	800 800	0.25	4.2 4.2	Power Supply: AC220V 50Hz Input signal: DC4-20mA DC1-5V (Shielded wire for signal line) Output signal: DC4～20mA Protection level: IP67 With handwheel	Power Supply: AC220V 50Hz Input signal: DC4-20mA DC1-5V (Shielded wire for signal line) Output signal: DC4～20mA Protection level: equivalent to IP55 Explosion proof mark: Exd Ⅱ BT4 With handle
202	361LSA-20 361LXA-20	2000	2000 2000	0.50	2.1 2.1
204	361LSB-30 361LXB-30	4500	3000 3000	0.50	3.5 3.5
208	361LSB-50 361LXB-50	8000	5000 5000	1.00	1.7 1.7
312	361LSC-65	12000	6500	0.60	2.8
325	361LSC-99	25000	10000	1.0	2.0

2. Performance indicators

project			Indicator value
Basic error%			Equipped with 3610L ± 2.5; Equipped with locator ± 1.0
Return difference%			Equipped with 361L ± 2.0; Equipped with PSL ± 1.0
Dead zone%			1.0
Constant point deviation%	Electric opening	Starting point	±2.5
		End	±2.5
	Electricity off	Starting point	±2.5
		End	±2.5
Adjustable range			50：1
Rated travel deviation%			2.5
Discharge rate L/H			Compliant with JB/T7387-94 Level IV rated capacity of less than valve × 10-4

3. Allow pressure difference

Nominal diameter (mm)		20				25	40		50	65	80	100	150		200	250	300
Valve seat diameter (mm)		10	12	15	20	25	32	40	50	65	80	100	125	150	200	250	300
Executing Agency		Allowable pressure difference △ P (MPa)
Equipped with PSL	PSL202	6.4	6.4	6.4	4.90	3.14	1.92	1.23	0.78
	PSL204						4.31	2.76	1.76	1.04	0.69	0.44
	PSL208									1.86	1.23	0.78	0.50	0.35	0.20
	PSL320												1.26	0.87	0.49	0.32	0.22
Equipped with 361L	361LSA-20	6.4	6.4	6.4	4.90	3.14	1.92	1.23	0.78
	361LSB-50						4.79	3.06	1.96	1.16	0.76	0.49
	361LSC-65									1.51	0.99	0.64	0.41	0.28
	361LSC-99												0.63	0.44	0.25	0.16	0.11

Note: The actual configuration needs to be determined based on specific process parameters. If the pressure difference is allowed to be clear or the maximum working pressure difference exceeds the list range, please contact us and take appropriate measures to solve it.

Dimensions mm

Public diameter (mm)			20	25	40	50	65	80	100	150	200	250	300
L(mm)	PN1.6MPa		181	184	222	254	276	298	352	451	600	720	820
	PN4.0MPa		194	197	235	267	292	317	368	473	600	760	850
	PN6.4MPa		206	210	251	286	311	337	394	508	650	800	870
H1(mm)			67	72	87	92	105	110	127	174	209	300	350
Equipped with PSL	H(mm)	Ordinary type	738	750	765	767	845	857	875	1025	1045	1252	1545
	H(mm)	Heat sink type	888	900	930	937	1025	1042	1085	1285	1305	1805	1825
	D(mm)		176									225
	Weight (KG)		15	17	24	29	49	61	82	150	211	370	570
Equipped with 361L	H(mm)	Ordinary type	501	513	650	652	770	782	800	1080	1125	1345	1365
	H(mm)	Heat sink type	651	663	815	822	950	967	1010	1340	1385	1625	1645
	D(mm)		225							310
	Weight (KG)		23	24	39	44	64	76	97	203	264	418	618