Petrochemical process pumps are designed according to API610 Designed according to API682 and VDMA24297 (heavy-duty) specifications. The pump is a single-stage, single suction cantilever volute pump, with the pump body supported by the centerline. Axial suction, radial discharge. Axial force is balanced hydraulically using front and rear mouth rings and balance holes. Mechanical seals can be of single or double end balanced container type. Mechanical seals are equipped with cooling, flushing, or sealing fluid systems, and the sealed piping system is designed according to API specifications. The working pressure is 5.0MPa. The suction and discharge flanges can comply with GB standards Designed according to DIN and ANSI standards.

The standard pipeline is designed according to API specifications and can cool the pump support of the center support. When the temperature T ≤ 200 ℃, the bearing frame does not need to be cooled; When the temperature T>200 ℃, the bearing frame is cooled by air or water. The pump cover has cooling or heating pipe joints, and the shaft seal adopts single or double end mechanical seal, equipped with cooling, flushing or sealing liquid system. The stainless steel material is 304304L, 316, 316L， CD-4Mcu, 904，904L， Hastelloy alloy, working pressure 5.0MPa, temperature -80~+450 ℃, flow rate 3-2600m3/h, head 3-260m, speed 1450-2900r/min

Suitable for conveying clean or low particle liquids, low or high temperature liquids, neutral or corrosive liquids. Suitable for refining, petrochemicals, coal processing and low-temperature engineering, papermaking, pharmaceuticals, water supply, power generation, environmental protection, synthetic fibers, fertilizers, metallurgy, food, etc.