ZN series micro high-speed crusher

　　Introduction and Characteristics:
The key to the micro high-speed crusher is the use of high-quality high-speed motors and high-speed wear-resistant bearings. During operation, the motor rotates smoothly at a high speed of 25000 revolutions per minute, rapidly crushing various medicinal herbs. For example: Ganoderma lucidum, Panax notoginseng, Panax ginseng, etc. The powder fineness can reach 80-150 mesh, which can fully meet the needs of traditional Chinese medicine pill making. This machine is suitable for various traditional Chinese medicine rooms, pharmacies, hospitals, outpatient departments, traditional Chinese medicine processing plants, etc. This machine has a huge market share nationwide due to its small size, high efficiency, easy operation, power saving, and safety. It is inevitable that counterfeit products have appeared, please be aware.
　　usage method:
1. Before using this machine, be sure to turn off the power switch first!
2. Open the upper cover (clockwise close, counterclockwise open), put the dry material into the crushing tank, and close the upper cover tightly.
3. Plug in the power and turn on the timer switch.
4. When the sound inside the crushing tank is relatively uniform, it indicates that the material has been crushed into powder and can be turned off.
5. Open the lid and pour out the powder.
　　matters needing attention:
1. To ensure the personal safety of the operator, the power supply must be grounded!
2. The material must be dry and should not be processed with damp and oily materials.
3. Do not place materials more than half of the capacity of the crushing tank at a time.
4. Generally, traditional Chinese medicine can be crushed in half a minute, while hard medicine can be crushed in one minute.
5. This machine cannot be used continuously for a long time, and the startup time should not exceed 1.5 minutes each time. If the processing quantity is large, it should be used at intervals to extend the service life of the motor.
6. When opening the top cover, be sure to turn off the power!
7. Regularly check the screws of the blade, which must be tightened.
　　Main technical parameters：

Model number	ZN-100	ZN-200A	ZN-400A	ZN-500A
Crushing weight	100g	200g	400g	500 g
Voltage	220V	220V	220V	220V
Power	500W	800W	1200W	1300 W
motor speed	22000 revolutions per minute	25000 revolutions per minute	25000 revolutions per minute	25000 revolutions per minute
Weight	2.9kg	6kg	9.5kg	10.5kg
External dimensions	150×150×300mm	200×220×280mm	200×220×320mm	200×220×340mm